Clark Michigan GEX30
Series: Clark Michigan Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Clark Michigan GEX30 is a forklift truck from the Clark Michigan Forklift series.
At 15 km/h, that is as fast as it goes. In service, it weighs 4,331 kg. Capacity is 2,722 kg.
Technical data
Dimensions and weights
| Ground clearance | 76.2 mmcorrect |
|---|---|
| Unladen weight | 4,330.9 kgcorrect |
Drivetrain and chassis
| Tyre type | Superelasticcorrect |
|---|---|
| Top speed | 15.1 km/hcorrect |
Working data
| Lifting capacity | 2,721.6 kgcorrect |
|---|
Other data
| Front wheels | 2correct |
|---|---|
| Kraftstoffart | Electric 80Vcorrect |
| Lift speed | 22.6 m/mincorrect |
| Load centre | 609.6 mmcorrect |
| Mast tilt back | 8 Gradcorrect |
| Mast tilt forward | 8 Gradcorrect |
| Rear wheels | 2correct |
| Senkgeschwindigkeit mmin | 28 m/mincorrect |
Frequently asked questions
How much does the Clark Michigan GEX30 weigh?
The unladen weight is 4,331 kg.
How fast does the Clark Michigan GEX30 go?
Top speed is 15.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.