StartHarvesting machineryCLAAS › Huckepack

CLAAS Huckepack

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CLAAS Huckepack is a machine built by CLAAS. The machine is 6,950 mm long, 2,520 mm wide and 2,750 mm high. Top speed is 18.1 km/h. 541 CLAAS models across 24 series are on record. The model is listed under Harvesting machinery. 5 verified figures from 2 sources are on file.

Technical data

Engine

EngineMWM AKD 9 ZB, (Diesel, 795 cm3, 9, 5-11 kW)oderHatz E89, (Diesel, 668 cm3 9 kW) (Diesel, 1125 cm3, 9, 5 kW)Für Dreschwerk: VW Typ 122(Otto, 1192 cm3, 20 kW)correct

Dimensions and weights

Length6,950correct
Width2,520correct
Height2,750correct

Drivetrain and chassis

Top speed18.1correct

Frequently asked questions

How fast does the CLAAS Huckepack go?

Top speed is 18.1 km/h.

What are the dimensions of the CLAAS Huckepack?

6,950 mm × 2,520 mm × 2,750 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare