Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › CLAAS › Ares 816

CLAAS Ares 816

Built: 2003–2007 · Series: Ares

More machines from model year 2003

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Ares 816, CLAAS offers a model from the Ares series. Production: 2003–2007. The engine delivers 156 hp (115 kW), has 6 cylinders, with a displacement of 6,788 cm³. Rated speed is 2,200 rpm. The machine is 4,535 mm long, 2,400 mm wide and 3,025 mm high. The unladen weight is 6,205 kg. The wheelbase measures 2,876 mm. Ground clearance is 490 mm. Top speed is 40 km/h. The tank holds 70 litres. The engine is water-cooled. Tyres: front 16.9 R 28, rear 20.8 R 38. The fuel is diesel. The Ares series covers 29 models. Rated output within it ranges from 90 to 194 hp; the Ares 816 sits in the upper part of that range with 156 hp. Its immediate neighbours are the Ares 697 ATZ below it with 140 hp and the Ares 826 above it with 175 hp. Unladen weight within it ranges from 5,010 to 6,450 kg; here the Ares 816 sits in the upper part of that range with 6,205 kg. 856 CLAAS models across 54 series are on record.

CLAAS Ares – Tractor Series With Renault Roots, 2003 to 2007, with Four- and Six-Cylinder Engines, 66 to 143 kW/90 to 194 hp and Operating Weight from 5,010 to 6,450 kg

The Ares series was originally developed by Renault Agriculture and continued under the CLAAS name after CLAAS took over the Le Mans plant in 2003; the register lists models up to model year 2007. Output of the recorded models ranges from 66 to 143 kW, with models rated in horsepower spanning 90 to 194 hp, using four- and six-cylinder engines with displacement from 4,525 to 6,788 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 5,010 to 6,450 kg, wheelbase from 2,564 to 2,876 mm, and top speed of the listed models spans 40 to 40.1 km/h. The Ares family also included ATZ-badged versions with a narrower track width or adapted chassis for specialised applications.

Within the CLAAS line-up, the Ares sat between the smaller Celtis and the larger Axion series, aimed at arable farms with medium to higher power requirements. When buying a used Ares, the exact variant matters, as chassis, cab and hydraulic equipment differ between versions.

With rated outputs from 66 to 143 kW, the Ares fell within ISO 730 Category II to III for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. The turbocharged John Deere diesel engines come from a manufacturer that remains active today and still supplies spare parts and service documentation for these model years.

Sources: SpecCodex register, model data: CLAAS Ares, CLAAS

Technical data

Engine

Fueldieselcorrect
Power156 hp (115 kW)correct
Rated speed2,200 rpmcorrect
Cylinders6correct
Displacement6,788 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,535 mmcorrect
Width2,400 mmcorrect
Height3,025 mmcorrect
Wheelbase2,876 mmcorrect
Ground clearance490 mmcorrect
Unladen weight6,205 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Front tyres16.9 R 28correct
Rear tyres20.8 R 38correct
Top speed40 km/hcorrect

Working data

Fuel tank capacity70 lcorrect

Where this model stands

Power-to-weight ratio: 18.5 kW/t (115 kW / 6.2 t)

Power class: Large (100–180 hp)

Stronger than 85% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the CLAAS Ares 816 have?

The CLAAS Ares 816 delivers 156 hp.

How much does the CLAAS Ares 816 weigh?

The unladen weight is 6,205 kg.

What engine does the CLAAS Ares 816 have?

6 cylinders, 6,788 cm³ displacement, Diesel.

How fast does the CLAAS Ares 816 go?

Top speed is 40 km/h.

What are the dimensions of the CLAAS Ares 816?

4,535 mm × 2,400 mm × 3,025 mm.

When was the CLAAS Ares 816 built?

Production years: 2003–2007.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare