Citroën CX 25 TRD
Built: 1988 · Series: CX
More machines from model year 1988
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Citroën CX – the Break Service as the utility version of the hydropneumatic executive car, four-cylinder engines of 1,995 to 2,500 cm³, unladen weights of 1,300 to 1,720 kg, built in Rennes
This page gathers Citroën CX models kept in the register as commercial vehicles – above all the Break Service versions of the CX, presented in 1974 as the successor to the DS and offered from 1976 also as an estate (Break). The Service suffix marks the utility version of the estate tailored to company and public-authority fleets, without a rear bench, giving the postal service, utilities and trades businesses a flat load floor at full payload. The CX was built at the Rennes-La Janais plant, with the hydropneumatic suspension typical of Citroën that kept a constant ride height even under full load; D in the model names marks the diesel engines, RD the turbocharged diesel, TRD and TRI the stronger petrol variants with injection or turbo.
Read on 3 more paragraphs
The register lists here 16 versions with four-cylinder engines of 1,995 to 2,500 cm³, unladen weights from 1,300 to 1,720 kg, gross weights from 1,800 to 2,190 kg and widths from 1,630 to 1,780 mm.
The CX Break Service was for years the backbone of public-authority and company fleets in France, combining the payload of a light commercial with the ride comfort of a saloon; the body, shaped for low drag by Robert Opron, is also regarded as aerodynamically advanced for its time.
On any CX, the hydropneumatics above all count – the nitrogen spheres, LHM fluid and main cylinder – along with rust on the sills and boot floor, the condition of the injection system on the petrol engines and of the injection pump on the diesels; parts supply today runs mainly through CX specialists and Citroën clubs.
Sources: SpecCodex register, model data: Citroën CX, Citroën (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|
Dimensions and weights
| Width | 1,770 mmcorrect |
|---|---|
| Wheelbase | 3,700 mmcorrect |
| Unladen weight | 1,640 kgcorrect |
| Gross vehicle weight | 2,190 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Citroën CX 25 TRD weigh?
The unladen weight is 1,640 kg.
What is the gross vehicle weight of the Citroën CX 25 TRD?
2,190 kg.
What engine does the Citroën CX 25 TRD have?
4 cylinders.
When was the Citroën CX 25 TRD built?
Production years: 1988.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
CX
CX 20 RE BREAK SERVICE
CX 20 SERVICE
CX 22 RS BREAK SERVICE
CX 2400
CX 25 D SERVICE
CX 25 RD BREAK
CX 25 RD BREAK SERVICE
CX 25 TRD SERVICE TURBO 2
CX 25 TRI BREAK SERVICE
CX 2500 D BREAK
CX 2500 FAMILIALE
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.