Chevrolet PICK UP BLAZER
Built: 1982 · Series: UP
More machines from model year 1982
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Chevrolet UP – collective page of the American pickup programme: C/K ranges, S10 and El Camino, V8 engines of 3.2 to 7.4 litre displacement
This page gathers the Chevrolet Pick Up, General Motors' American pickup programme, here in commercial registration as a goods vehicle. Chevrolet, founded in 1911 in Detroit and part of General Motors since 1918, built its pickups over the decades in the C (rear-wheel drive) and K (four-wheel drive) ranges as well as the compact S10; the El Camino rounded out the line-up as a car-based coupé utility, and the Silverado has replaced the C/K range as the flagship since the 1990s. Custom, Cheyenne and Fleetside/Stepside mark equipment and load-bed variants.
Read on 3 more paragraphs
The register lists here 50 versions with displacements from 3,200 to 7,446 cm³ from four- to eight-cylinders and unladen weights from 883 to 2,560 kg against gross weights of 1,600 to 3,500 kg; output is recorded for a single entry at 186 kW, lengths at 4,900 to 5,530 mm.
The Chevrolet Pick Up is one of the best-selling vehicles in North America and was long available in Europe as a US import or grey import, with V8 engines as a typical power source; commercial registration as a goods vehicle was common above all in the Netherlands.
On used examples, the V8 engines call for checking the valvetrain, carburettor or injection system and cooling, the load bed, frame and wheel arches for rust – a known weak point of the range – and, on K models, the transfer case and axles; parts are available through the US-import parts trade.
Sources: SpecCodex register, model data: Chevrolet UP, Chevrolet (General Motors, Hersteller)
Technical data
Engine
| Cylinders | 8correct |
|---|---|
| Displacement | 5,200 cm³correct |
Dimensions and weights
| Wheelbase | 3,000 mmcorrect |
|---|---|
| Unladen weight | 2,080 kgcorrect |
| Gross vehicle weight | 2,767 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Chevrolet PICK UP BLAZER weigh?
The unladen weight is 2,080 kg.
What is the gross vehicle weight of the Chevrolet PICK UP BLAZER?
2,767 kg.
What engine does the Chevrolet PICK UP BLAZER have?
8 cylinders, 5,200 cm³ displacement.
When was the Chevrolet PICK UP BLAZER built?
Production years: 1982.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
PICK UP 1.0 DIESEL
PICK UP 10
PICK UP 10 DIESEL
PICK UP 1300
PICK UP 1500 4X4
PICK UP 1500 STEP SIDE
PICK UP 20903
PICK UP 2500
PICK UP 2500 TD 4X4
PICK UP 2500 TURBO D 4X4
PICK UP 3100
PICK UP 3104
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
