Chevrolet Itasca C10
Built: 1976 · Series: Other models
More machines from model year 1976
Chevrolet Itasca – other models: the collective page of motorhome chassis, the C10 and Silverado, V8 engines of 5.7 to 6.2 litres, gross weight up to 3,200 kg
This page gathers Chevrolet chassis under the register designation Itasca, the name of a Winnebago motorhome brand that builds bodies on Chevrolet chassis. Listed here are a version based on the Chevrolet C10 and one based on the Chevrolet Silverado, two light pick-up chassis with V8 engines that serve as a load-bearing base for living bodies.
Read on 3 more paragraphs
The register lists 2 versions here with displacement from 5,735 to 6,162 cm³ from eight-cylinder engines, kerb weights from 1,381 to 2,561 kg, gross vehicle weights from 2,449 to 3,221 kg, a length of 5,890 mm and widths from 2,060 to 2,070 mm.
As a base for motorhome bodies, C10 and Silverado chassis are common across North America, where box bodies turn them into full recreational vehicles for touring and camping; the V8 engines provide the pulling power needed for the high body weight, while the chassis itself largely matches the production state of the respective pick-up.
For a used example, check the condition and mounting of the living body on the chassis, corrosion on the frame and axles given the high payload, the condition of the clutch, brakes and suspension, and the operation of the supply and waste systems typical of motorhomes; the tightness of the joints between the cab and the living body also deserves attention. Chassis parts run through the Chevrolet dealer network, and the body through specialist motorhome workshops.
Sources: SpecCodex register, model data: Chevrolet Itasca (weitere Modelle), Chevrolet (General Motors, Hersteller)
Technical data
Engine
| Cylinders | 8correct |
|---|---|
| Displacement | 5,735 cm³correct |
Dimensions and weights
| Width | 2,070 mmcorrect |
|---|---|
| Wheelbase | 3,330 mmcorrect |
| Unladen weight | 1,381 kgcorrect |
| Gross vehicle weight | 2,449 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Chevrolet Itasca C10 weigh?
The unladen weight is 1,381 kg.
What is the gross vehicle weight of the Chevrolet Itasca C10?
2,449 kg.
What engine does the Chevrolet Itasca C10 have?
8 cylinders, 5,735 cm³ displacement.
When was the Chevrolet Itasca C10 built?
Production years: 1976.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.