Charleroi Constructions SS/2/32P
Built: 1983 · Series: Other models
More machines from model year 1983
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Charleroi Constructions – other models: Belgian EU class O4 semi-trailers with gross weights of 27,000 to 39,000 kg, the type number giving the weight class in tonnes
This page gathers the semi-trailers of Charleroi Constructions from Belgium the register could not assign to a named range. The type designations RSS 27, SJ-3-39 and SS/2/32P each give a range and a number matching the gross weight in tonnes – 27, 32 and 39 t; the letters ahead of the number mark the body variant within the maker's programme.
Read on 4 more paragraphs
The register lists here 3 versions with unladen weights from 5,480 to 8,690 kg, gross weights from 27,000 to 39,000 kg, lengths from 10,160 to 12,700 mm and widths from 2,520 to 2,570 mm.
Semi-trailers of this weight class have to carry air brakes; the tow vehicle required is a tractor unit with licence category CE. The rear underrun guard is a legal requirement on this vehicle class and protects following cars from sliding underneath the semi-trailer.
Semi-trailers of this weight class run in Belgian and Western European building-material and heavy-goods transport, where they operate behind tractor units up to the permitted gross train weight; the spread of unladen weights from 5.5 to 8.7 t reflects differently reinforced frames and bodies within the same load class.
On used semi-trailers, frame and axle condition, the braking system, rust on the chassis rails and body, the fifth-wheel coupling and underrun guard, and the condition of tyres and rims count; parts run through Charleroi Constructions and the Belgian and French trailer suppliers.
Sources: SpecCodex register, model data: Charleroi Constructions (weitere Modelle)
Technical data
Dimensions and weights
| Length | 11,980 mmcorrect |
|---|---|
| Width | 2,520 mmcorrect |
| Wheelbase | 8,580 mmcorrect |
| Unladen weight | 8,250 kgcorrect |
| Gross vehicle weight | 28,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Charleroi Constructions SS/2/32P weigh?
The unladen weight is 8,250 kg.
What is the gross vehicle weight of the Charleroi Constructions SS/2/32P?
28,000 kg.
Up to what speed is the Charleroi Constructions SS/2/32P approved?
Approved up to 100 km/h.
What are the dimensions of the Charleroi Constructions SS/2/32P?
11,980 mm × 2,520 mm.
When was the Charleroi Constructions SS/2/32P built?
Production years: 1983.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.