Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › KhTZ › Other models › T-150K

KhTZ T-150K

Series: Other models

Wikimedia Commons · CC BY-SA 3.0 · цценралсим LutzBruno · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The T-150K comes from KhTZ. The machine is 5,795 mm long, 2,400 mm wide and 3,195 mm high. The unladen weight is 7,910 kg. The wheelbase measures 2,860 mm. Top speed is 30 km/h. Transmission: 12 plus 4. Unladen weight within this group ranges from 3 to 18,502,360 kg; the T-150K sits at the bottom of that range with 7,910 kg. Its immediate neighbours are the 6388 below it with 7,902 kg and the RT-165 A above it with 7,920 kg.

ChTS-7: simple farm tractor with a two-cylinder four-stroke petrol engine, a weight of 1,302 kg and a top speed of 12.73 km/h

With a two-cylinder four-stroke petrol engine instead of a diesel and a build height of only 1,264 mm, the ChTS-7 belongs to the class of simple, very light farm tractors of an older design, typical before the diesel engine became widespread in agricultural machinery.

Read on 3 more paragraphs

The engine is a two-cylinder four-stroke petrol unit; the machine weighs 1,302 kg, measures 2,550 mm in length and 1,240 mm in width on a wheelbase of 1,650 mm. Top speed stands at 12.73 km/h.

A petrol engine with only two cylinders and a top speed capped at 12.73 km/h mark a simple machine for slow field work rather than road transport; the low build height and light weight point to a compact, basic tractor without extensive extra equipment. For ploughing or harrowing small plots, the pulling power of such a two-cylinder unit was sufficient, but it was never intended for heavy tillage on large fields.

When buying a ChTS-7 used, given how simple and historic the machine is, the condition of the two-cylinder petrol engine, including carburettor and ignition, matters most, since spare parts for petrol engines of this design are practically unobtainable new today. Also worth checking are corrosion on the frame, the state of the tyres and the function of the brakes, which are often the weak point on such old designs.

Sources: SpecCodex-Register: Kennwerte des Modells ChTS-7

Technical data

Engine

EngineSMD-62correct

Dimensions and weights

Length5,795 mmcorrect
Width2,400 mmcorrect
Height3,195 mmcorrect
Wheelbase2,860 mmcorrect
Unladen weight7,910 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox12 plus 4correct
Top speed30 km/hcorrect

Frequently asked questions

How much does the KhTZ T-150K weigh?

The unladen weight is 7,910 kg.

How fast does the KhTZ T-150K go?

Top speed is 30 km/h.

What are the dimensions of the KhTZ T-150K?

5,795 mm × 2,400 mm × 3,195 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikipedia (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare