Chardron NOUVEAU MASTER VAN
Built: 2013 · Series: Other models
More machines from model year 2013
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Chardron – other models: the collective page of the register entry Master Van and Nouveau Master Van on the Renault Master base, four-cylinder engine of 2.3 litres, gross weight 3,500 kg
This page gathers the versions listed in the register under the designation Chardron, Master Van and Nouveau Master Van, built on the Renault Master chassis, which the register could not assign to a named series of its own. The Nouveau (French for new) suffix distinguishes the updated version of the panel van from the original.
Read on 3 more paragraphs
The register lists 2 versions here with a uniform displacement of 2,299 cm³ from four-cylinder engines, a kerb weight of 2,402 kg, a gross vehicle weight of 3,500 kg, a length of 6,310 mm and widths from 2,100 to 2,120 mm.
As panel vans on the Master base with a gross weight of 3,500 kg, the Master Van and Nouveau Master Van are common in commercial distribution transport, serving courier firms, tradespeople and small hauliers with category B panel vans; the identical kerb weight of both versions points to a largely unchanged base structure across the two generations.
For a used example, check the tightness of the sliding doors and load floor, the condition of the clutch and brake system, corrosion on the frame and wheel arches, and the condition of the load-securing fittings inside; on panel vans, also check the joints between the cab and the body, the operation of the load-space lighting, and the rear door seals. Parts run through the Renault dealer network.
Sources: SpecCodex register, model data: Chardron (weitere Modelle)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,299 cm³correct |
Dimensions and weights
| Length | 6,310 mmcorrect |
|---|---|
| Width | 2,120 mmcorrect |
| Wheelbase | 4,330 mmcorrect |
| Unladen weight | 2,402 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 138 km/hcorrect |
Frequently asked questions
How much does the Chardron NOUVEAU MASTER VAN weigh?
The unladen weight is 2,402 kg.
What is the gross vehicle weight of the Chardron NOUVEAU MASTER VAN?
3,500 kg.
What engine does the Chardron NOUVEAU MASTER VAN have?
4 cylinders, 2,299 cm³ displacement.
How fast does the Chardron NOUVEAU MASTER VAN go?
Top speed is 138 km/h.
What are the dimensions of the Chardron NOUVEAU MASTER VAN?
6,310 mm × 2,120 mm.
When was the Chardron NOUVEAU MASTER VAN built?
Production years: 2013.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
