Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Changlin › Other models › CL2004

Changlin CL2004 – specifications

Series: Other models

Build year not documented · Data origin: Reference work (Wikipedia/Wikibooks) · sources

Source: nyteknik.se

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Changlin CL2004 is a tractor from Changlin. The engine is rated at 150 kW.

It runs with MFWD.

It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 26 to 150 kW; with 150 kW, the CL2004 sits at the top. Below it ranks the CL1204 with 89 kW.

Changlin – other models: the collective page of Chinese tractors outside the named ranges, CL 1204, CL 2004, SH 820, Sina 354 and Sina 454, 26 to 150 kW

This page gathers the Changlin tractors the register could not assign to a named range: the CL range with the large tractors CL 1204 and CL 2004, the SH 820 type and the Sina range with Sina 354 and Sina 454. Changlin of China is known chiefly as a maker of construction machinery such as graders and wheel loaders, and also carries wheeled tractors in its line-up, extending its business beyond construction equipment into farm machinery.

Read on 3 more paragraphs

The register lists here 5 versions with 26 to 150 kW, or 35 to 200 hp, all with a diesel engine.

The wide power span from smaller to large 200 hp tractors shows the breadth of the Chinese farm-machinery market, on which makers such as Changlin serve both domestic demand and exports to other Asian, African and Eastern European markets; running three ranges (CL, SH, Sina) in parallel points to different target segments, from municipal use to large farm tractors.

On these tractors, engine condition and operating hours, the condition of clutch and gearbox, the function of the hydraulics, and rust on sheet metal and cab count; parts supply outside China depends heavily on the respective importer and its spare-parts stock, so it is worth asking about lead times for wear parts before purchase.

Sources: SpecCodex register, model data: Changlin (weitere Modelle)

Technical data

Engine

Fueldieselcorrect
Power200 hp (150 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect

Origin and approval

PlantChinacorrect

Frequently asked questions

How much power does the Changlin CL2004 have?

The Changlin CL2004 delivers 200 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​​​‌‍‍‍​‍​‍​‍‍‍‌​‍‍​

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare