Challenger RB463A AutoCycle – specifications
Series: Other models
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Challenger – other balers: large-square and round balers from the AGCO brand built in Hesston, the LB and RB ranges, 2,594 to 10,315 kg, some with AutoCycle automatic wrapping
Challenger is an agricultural machinery brand of the AGCO group; the brand's balers are built at the Hesston plant in Kansas, USA. This collective page lists large square balers of the LB range (LB33, LB34, LB44 along with their further developed B versions) and round balers of the RB range (RB453, RB463, RB563) outside the independently maintained main ranges; the AutoCycle designation on the RB463A and RB563A denotes an automated net or film wrapping cycle.
Read on 3 more paragraphs
The register lists here 11 versions with weights from 2,594.5 to 10,315.1 kg, lengths from 3,770 to 9,400 mm, a width of 3,000 mm and heights from 2,620 to 3,680 mm.
Large square balers such as the LB range compress hay, straw or crop residue into rectangular bales for long-distance transport and biomass use, while round balers such as the RB range are mainly used in forage harvesting for cattle and dairy farming; the two designs complement each other in the range for different farm sizes and purposes.
On used examples, the condition of the knotter or wrapping mechanism, wear on the pickup and tines, the condition of chains, belts and bale-chamber bearings, and the function of the net or film wrap and the tyres all matter; spare parts run through the AGCO dealer network.
Sources: SpecCodex register, model data: Challenger Ballenpressen (weitere Modelle)
Technical data
Engine
| PTO power required | 48.5 kWcorrect |
|---|
Dimensions and weights
| Length | 3,770 mmcorrect |
|---|---|
| Height | 2,920 mmcorrect |
| Unladen weight | 2,776 kgcorrect |
Working data
| Number of tines | 96correct |
|---|---|
| Twine rolls | 8correct |
| Number of knife bars | 4correct |
| Twine tying | Automatic, Electric Actuatedcorrect |
| Number of belts | 6correct |
| Belt width | 177.8 mmcorrect |
| Max. bale weight | 997.9 kgcorrect |
Other data
| Ballengewicht min kg | 745.7 kgcorrect |
|---|
Frequently asked questions
How much does the Challenger RB463A AutoCycle weigh?
The unladen weight is 2,776 kg.
What are the dimensions of the Challenger RB463A AutoCycle?
3,770 mm × 2,920 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Round baler in 3D section
Turn the model, look inside and click an assembly — each one is explained.
