Caterpillar PR75
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Caterpillar PR75 is a Cold planers from Caterpillar. The engine draws 57.4 kW from 3.9 litres.
Top speed is 18 km/h.
Within the range, rated power spans from 57.4 to 750 kW; with 57.4 kW, the PR75 sits at the bottom end. The next one up is the PR105 with 67 kW.
Technical data
Engine
| Engine make | 2,351correct |
|---|---|
| Engine model | 4,236correct |
| Power | 57.4 kWcorrect |
| Displacement | 3,870.6 cm³correct |
Drivetrain and chassis
| Top speed | 17.7 km/hcorrect |
|---|
Working data
| Fuel tank capacity | 91.2 lcorrect |
|---|
More machines with this engine (Perkins 4.236, 20)
Frequently asked questions
How much power does the Caterpillar PR75 have?
The Caterpillar PR75 delivers 57.4 kW.
What engine does the Caterpillar PR75 have?
3,871 cm³ displacement.
How fast does the Caterpillar PR75 go?
Top speed is 17.7 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Asphalt paver in 3D section
Turn the model, look inside and click an assembly — each one is explained.