Caterpillar D10N

Built: 1987-1996 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Caterpillar D10N is a machine built by Caterpillar. Production: 1987-1996. The engine delivers 529 hp (394 kW). The engine comes from Caterpillar. Drive: tracked undercarriage. The engine is water-cooled. The model was built in USA. The fuel is diesel. Its predecessor was the Caterpillar D9L. Rated output across the Caterpillar range ranges from 15 to 529 hp; the D10N sits at the top of that range with 529 hp. Its immediate neighbours are the D9 series below it with 474 hp. 1091 Caterpillar models across 47 series are on record. The model is listed under Excavators & compaction. 11 verified figures from 1 source are on file.

Technical data

Engine

Engine makeCaterpillarcorrect
Fueldieselcorrect
Power529 hp (394 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Drivetracked undercarriagecorrect

Origin and approval

PlantUSAcorrect
PredecessorCaterpillar D9Lcorrect

Frequently asked questions

How much power does the Caterpillar D10N have?

The Caterpillar D10N delivers 529 hp.

When was the Caterpillar D10N built?

Production years: 1987-1996.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare