Start › Forestry equipment › Caterpillar › D4H TSK Series II

Caterpillar D4H TSK Series II

Series: Caterpillar Skidder

The photo shows the 528 from the same series. Source: https://commons.wikimedia.org/wiki/File:Caterpillar_528_skid

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Caterpillar Skidder series from Caterpillar includes the D4H TSK Series II. The engine delivers 96.6 hp (71.1 kW), with a displacement of 5,201.3 cm³. The unladen weight is 12,909 kg. Ground clearance is 560.8 mm. The tank holds 167.3 litres. The gearbox has 3 forward gears. The engine fitted is the 3,204. The Caterpillar Skidder series covers 20 models. Rated output within it ranges from 96.3 to 1,217.7 hp; the D4H TSK Series II sits at the bottom of that range with 96.6 hp. Its immediate neighbours are the 508 Grapple below it with 96.3 hp and the D4H above it with 100.4 hp. 1091 Caterpillar models across 47 series are on record. The model is listed under Forestry equipment. 10 verified figures from 1 source are on file.

Technical data

Engine

Engine model3,204correct
Power96.6 hp (71.1 kW)correct
Displacement5,201.3 cm³correct

Dimensions and weights

Width2,462.8correct
Ground clearance560.8correct
Unladen weight12,909 kgcorrect

Drivetrain and chassis

Forward gears3correct

Working data

Fuel tank capacity167.3 lcorrect

Other data

Height3,160.8correct

Where this model stands

Power-to-weight ratio: 5.5 kW/t (71 kW / 12.9 t)

Stronger than 3% of the forestry equipment in the register — out of 111 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Caterpillar D4H TSK Series II have?

The Caterpillar D4H TSK Series II delivers 96.6 hp.

How much does the Caterpillar D4H TSK Series II weigh?

The unladen weight is 12,909 kg.

What engine does the Caterpillar D4H TSK Series II have?

5,201 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

508 Cable

508 Grapple

515

517 Grapple

518

518 Cable

518 Grapple

525

525B

525C Grapple

527

527 Grapple

Sources: [1]

Forwarder in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare