StartMining equipmentCaterpillar › D4H Series II

Caterpillar D4H Series II Crawler

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the D4H Series II, Caterpillar offers a model from the Caterpillar Crawler Tractor series. The engine delivers 100.4 hp (70.8 kW), has 4 cylinders, with a displacement of 5,201.3 cm³. Rated speed is 2,200 rpm. The unladen weight is 10,250 kg. Ground clearance is 378 mm. The tank holds 167.3 litres. The gearbox has 3 forward gears. There are also 3 reverse gears. The pump delivers 94.6 l/min. Working pressure is 186.2 bar. The cooling system holds 27.3 litres. The oil fill is 15.1 litres. The engine fitted is the 3,204. The Caterpillar Crawler Tractor series covers 152 models. Rated output within it ranges from 48.7 to 948 hp; the D4H Series II sits at the bottom of that range with 100.4 hp. Its immediate neighbours are the D4E SA below it with 97.9 hp and the D5K LGP above it with 101.4 hp. 1091 Caterpillar models across 47 series are on record. The model is listed under Mining equipment. 18 verified figures from 1 source are on file.

Technical data

Engine

Engine model3,204correct
Power100.4 hp (70.8 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement5,201.3 cm³correct
Aspirationturbochargedcorrect
Coolant capacity27.3 lcorrect
Engine oil capacity15.1 lcorrect

Dimensions and weights

Ground clearance378correct
Unladen weight10,250 kgcorrect

Drivetrain and chassis

Gearbox typeplanetary power shiftcorrect
Forward gears3correct
Reverse gears3correct

Working data

Pump flow94.6 l/mincorrect
Hydraulic pressure186.2correct
Fuel tank capacity167.3 lcorrect

Other data

Height2,987correct

Where this model stands

Power-to-weight ratio: 6.9 kW/t (71 kW / 10.2 t)

Stronger than 29% of the mining equipment in the register — out of 945 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Caterpillar D4H Series II have?

The Caterpillar D4H Series II delivers 100 hp.

How much does the Caterpillar D4H Series II weigh?

The unladen weight is 10,250 kg.

What engine does the Caterpillar D4H Series II have?

4 cylinders, 5,201 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare