Caterpillar D11N Crawler

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The D11N from Caterpillar is part of the Caterpillar Crawler Tractor series. The engine delivers 780.7 hp (574.2 kW), with a displacement of 34,501.3 cm³. The unladen weight is 95,846 kg. Ground clearance is 624.8 mm. The tank holds 1,490.3 litres. The gearbox has 3 forward gears. There are also 3 reverse gears. The pump delivers 610.2 l/min. Working pressure is 227.5 bar. The engine fitted is the 3,508. The Caterpillar Crawler Tractor series covers 152 models. Rated output within it ranges from 48.7 to 948 hp; the D11N sits in the upper part of that range with 780.7 hp. Its immediate neighbours are the D10 below it with 709.7 hp and the DD9H above it with 831.4 hp. 1091 Caterpillar models across 47 series are on record. The model is listed under Mining equipment. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine model3,508correct
Power780.7 hp (574.2 kW)correct
Displacement34,501.3 cm³correct
Aspirationturbochargedcorrect

Dimensions and weights

Ground clearance624.8correct
Unladen weight95,846 kgcorrect

Drivetrain and chassis

Gearbox typepowershift transmissioncorrect
Forward gears3correct
Reverse gears3correct

Working data

Pump flow610.2 l/mincorrect
Hydraulic pressure227.5correct
Fuel tank capacity1,490.3 lcorrect

Other data

Height4,562.9correct

Where this model stands

Power-to-weight ratio: 6 kW/t (574 kW / 95.8 t)

Stronger than 93% of the mining equipment in the register — out of 945 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Caterpillar D11N have?

The Caterpillar D11N delivers 781 hp.

How much does the Caterpillar D11N weigh?

The unladen weight is 95,846 kg.

What engine does the Caterpillar D11N have?

34,501 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare