StartMining equipmentCaterpillar › D10T WH

Caterpillar D10T WH Crawler

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the D10T WH, Caterpillar offers a model from the Caterpillar Crawler Tractor series. The engine delivers 670.2 hp (432.5 kW), has 12 cylinders, with a displacement of 26,997.7 cm³. Rated speed is 1,800 rpm. The unladen weight is 65,764.5 kg. Ground clearance is 609.6 mm. The tank holds 1,109.1 litres. The gearbox has 3 forward gears. There are also 3 reverse gears. The electrical system runs on 24 V. The engine fitted is the Cat C27 ACERT. The Caterpillar Crawler Tractor series covers 152 models. Rated output within it ranges from 48.7 to 948 hp; the D10T WH sits in the upper part of that range with 670.2 hp. Its immediate neighbours are the D10T below it with 655 hp and the D10 above it with 709.7 hp. 1091 Caterpillar models across 47 series are on record. The model is listed under Mining equipment. 15 verified figures from 1 source are on file.

Technical data

Engine

Engine modelCat C27 ACERTcorrect
Power670.2 hp (432.5 kW)correct
Rated speed1,800 rpmcorrect
Cylinders12correct
Displacement26,997.7 cm³correct
Aspirationturbochargedcorrect

Dimensions and weights

Ground clearance609.6correct
Unladen weight65,764.5 kgcorrect

Drivetrain and chassis

Gearbox typePower shiftcorrect
Forward gears3correct
Reverse gears3correct
System voltage24 Vcorrect

Working data

Fuel tank capacity1,109.1 lcorrect

Other data

Height4,078.2correct

Where this model stands

Power-to-weight ratio: 6.6 kW/t (432 kW / 65.8 t)

Stronger than 89% of the mining equipment in the register — out of 945 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Caterpillar D10T WH have?

The Caterpillar D10T WH delivers 670 hp.

How much does the Caterpillar D10T WH weigh?

The unladen weight is 65,764 kg.

What engine does the Caterpillar D10T WH have?

12 cylinders, 26,998 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare