Start › Wheel loaders › Caterpillar › 962H

Caterpillar 962H

Series: Caterpillar Wheel Loader

The photo shows the 980M from the same series. Source: https://commons.wikimedia.org/w/index.php?curid=181504212

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Caterpillar 962H belongs to the Caterpillar Wheel Loader series. The engine delivers 233.2 hp (157.3 kW), has 6 cylinders, with a displacement of 7,193.9 cm³. Torque is 907 Nm. Rated speed is 1,800 rpm. The unladen weight is 19,368.4 kg. The wheelbase measures 3,352.8 mm. Ground clearance is 411.5 mm. The tank holds 314.2 litres. The gearbox has 4 forward gears. There are also 4 reverse gears. The pump delivers 268.8 l/min. The hydraulic tank holds 109.8 litres. The cooling system holds 41.6 litres. The electrical system runs on 24 V. The engine fitted is the Cat C7 ACERT. Tyre size: 23,5R25. The Caterpillar Wheel Loader series covers 78 models. Rated output within it ranges from 42.6 to 1,598.9 hp; the 962H sits at the bottom of that range with 233.2 hp. Its immediate neighbours are the 950H below it with 220 hp and the 966F above it with 238.3 hp. 1091 Caterpillar models across 47 series are on record. The model is listed under Wheel loaders. 20 verified figures from 1 source are on file.

Technical data

Engine

Engine modelCat C7 ACERTcorrect
Power233.2 hp (157.3 kW)correct
Rated speed1,800 rpmcorrect
Torque907correct
Cylinders6correct
Displacement7,193.9 cm³correct
Coolant capacity41.6 lcorrect

Dimensions and weights

Wheelbase3,352.8correct
Ground clearance411.5correct
Unladen weight19,368.4 kgcorrect

Drivetrain and chassis

Gearbox typepowershift transmissioncorrect
Forward gears4correct
Reverse gears4correct
Tyre size23.5R25correct
System voltage24 Vcorrect

Working data

Pump flow268.8 l/mincorrect
Hydraulic oil capacity109.8 lcorrect
Fuel tank capacity314.2 lcorrect

Other data

Height3,453.4correct

Where this model stands

Power-to-weight ratio: 8.1 kW/t (157 kW / 19.4 t)

Stronger than 76% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Caterpillar 962H have?

The Caterpillar 962H delivers 233 hp.

How much does the Caterpillar 962H weigh?

The unladen weight is 19,368 kg.

What engine does the Caterpillar 962H have?

6 cylinders, 7,194 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

902

903C

904B

904H

906

906H

906H2

908

908H

910

910E

914G

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare