Start › Wheel loaders › Caterpillar › 910E

Caterpillar 910E

Series: Caterpillar Wheel Loader

Source: https://catused.com/cn/dealer.aspx?orgid=%7Bb09a7392-882c-41

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Caterpillar 910E is a model in the Caterpillar Wheel Loader series. The engine delivers 82.1 hp (55.9 kW), has 4 cylinders, with a displacement of 4,401.6 cm³. Rated speed is 2,400 rpm. The unladen weight is 7,248 kg. The wheelbase measures 2,337.8 mm. Ground clearance is 344.4 mm. The tank holds 97.3 litres. The gearbox has 4 forward gears. There are also 3 reverse gears. The pump delivers 112 l/min. The hydraulic tank holds 70 litres. The cooling system holds 30.3 litres. The electrical system runs on 24 V. The engine fitted is the 3,114. Tyre size: 15,5x25 8 PR(L-2). The Caterpillar Wheel Loader series covers 78 models. Rated output within it ranges from 42.6 to 1,598.9 hp; the 910E sits at the bottom of that range with 82.1 hp. Its immediate neighbours are the 906 below it with 76 hp and the 908H above it with 84.2 hp. 1091 Caterpillar models across 47 series are on record. The model is listed under Wheel loaders. 20 verified figures from 1 source are on file.

Technical data

Engine

Engine model3,114correct
Power82.1 hp (55.9 kW)correct
Rated speed2,400 rpmcorrect
Cylinders4correct
Displacement4,401.6 cm³correct
Aspirationturbochargedcorrect
Coolant capacity30.3 lcorrect

Dimensions and weights

Wheelbase2,337.8correct
Ground clearance344.4correct
Unladen weight7,248 kgcorrect

Drivetrain and chassis

Gearbox typepowershift transmissioncorrect
Forward gears4correct
Reverse gears3correct
Tyre size15.5x25 8 PR(L-2)correct
System voltage24 Vcorrect

Working data

Pump flow112 l/mincorrect
Hydraulic oil capacity70 lcorrect
Fuel tank capacity97.3 lcorrect

Other data

Height2,996.2correct

Where this model stands

Power-to-weight ratio: 7.7 kW/t (56 kW / 7.2 t)

Stronger than 25% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Caterpillar 910E have?

The Caterpillar 910E delivers 82.1 hp.

How much does the Caterpillar 910E weigh?

The unladen weight is 7,248 kg.

What engine does the Caterpillar 910E have?

4 cylinders, 4,402 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

902

903C

904B

904H

906

906H

906H2

908

908H

910

914G

916

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare