Caterpillar 5080 – specifications
Series: Other models
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Caterpillar 5080 is a mining machine made by Caterpillar. From 14.6 litres the engine produces 319.2 kW.
Within the range, rated power spans from 186 to 597 kW; with 319 kW, the 5080 sits in the upper third. Directly alongside are the E650 with 280 kW below and the 5130B with 597 kW above.
Caterpillar – Mining equipment at a glance
This page groups 3 Mining equipment models from Caterpillar that the register does not assign to a named series. Rated power ranges from 186 to 280 kW. Listed in the register: 235C, E450, E650.
Sources: SpecCodex-Register (eigene Daten)
Technical data
Engine
| Engine model | 3406C ATAACcorrect |
|---|---|
| Power | 319.2 kWcorrect |
| Displacement | 14,600.9 cm³correct |
Dimensions and weights
| Ground clearance | 74.2 mmcorrect |
|---|
Working data
| Fuel tank capacity | 990.3 lcorrect |
|---|
Area: Machines › Construction machinery › Mining equipment
Frequently asked questions
How much power does the Caterpillar 5080 have?
The Caterpillar 5080 delivers 319 kW.
What engine does the Caterpillar 5080 have?
14,601 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Dump truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
