Caterpillar 235C
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Caterpillar 235C is a mining machine made by Caterpillar. From 10.5 litres the engine produces 186.4 kW.
Within the range, rated power spans from 186 to 597 kW; with 186 kW, the 235C sits at the bottom end. The next one up is the E450 with 206 kW.
Technical data
Engine
| Engine model | 3,306correct |
|---|---|
| Power | 186.4 kWcorrect |
| Displacement | 10,500.8 cm³correct |
Dimensions and weights
| Ground clearance | 44.2 mmcorrect |
|---|
Working data
| Fuel tank capacity | 492.1 lcorrect |
|---|
More machines with this engine (Caterpillar 3306, 56)
Frequently asked questions
How much power does the Caterpillar 235C have?
The Caterpillar 235C delivers 186 kW.
What engine does the Caterpillar 235C have?
10,501 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Dump truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.