Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case IH › STX 275

Case IH STX 275

Built: 2000–2005 · Series: STX-Baureihe

More machines from model year 2000

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the STX 275, Case IH offers a model from the STX series. Production: 2000–2005. The engine delivers 275 hp (202.3 kW), has 6 cylinders, with a displacement of 8,268 cm³. Torque is 1,293 Nm. Rated speed is 2,000 rpm. The machine is 7,010 mm long, 3,048 mm wide and 3,480 mm high. The unladen weight is 14,422 kg. The wheelbase measures 3,531 mm. Top speed is 30 km/h. The tank holds 757 litres. Transmission: 17 V/2 R. The engine is water-cooled. Tyres: front 20.8 R 42 AS, rear 20.8 R 42 AS. The fuel is diesel. The bore measures 114 mm. The stroke is 135 mm. The compression ratio is 17.1:1. Construction: articulated frame. The gearbox offers 17 forward gears. There are also 2 reverse gears. The linkage is category I. The STX-Baureihe series covers 11 models. Rated output within it ranges from 275 to 500 hp; the STX 275 sits at the bottom of that range with 275 hp. Its immediate neighbours are the STX 325 above it with 325 hp. Unladen weight within it ranges from 14,422 to 17,917 kg; here the STX 275 sits at the bottom of that range with 14,422 kg. 1222 Case IH models across 76 series are on record.

Case IH STX Steiger (2000–2007) – the articulated tractors from Fargo, North Dakota: STX 275 to STX 535, the number as hp class, Quadtrac as the four-track version, QT as short form, CNH 8.3 litre

The STX range was Case IH's big tractor of the first CNH years – built in Fargo, North Dakota, the plant of the articulated-tractor pioneer Steiger that Case had taken over in 1986 and whose name still stands on the tractors today. The type logic: STX marks the range, the number the hp class – STX 275 about 275 hp, STX 375 375 hp, STX 480 480 hp, STX 535 about 535 hp as the most powerful model of the 2007 upgrade – Quadtrac and QT the version on four rubber tracks instead of wheels, which Case IH brought to series production in 1996 as the first company. The engines are graded by size: the CNH six-cylinder of 8.3 litres in the STX 275 and 325, the Cummins QSM11 of 10.8 litres in the STX 375 and 440, the Cummins QSX15 of 14.9 litres in the STX 450 to 535 – the register span of 8,268 to 15,000 cm³ shows the three steps. The STXs are technically the red twins of the New Holland TJ from the same plant.

Read on 3 more paragraphs

The register lists 11 versions with 202.3 to 439 kW from six-cylinders at 2,000 rpm, unladen weights from 14,422 to 24,500 kg, a lift capacity up to 8,949 kg, lengths from 7,010 to 7,800 mm, widths from 3,000 to 3,886 mm and heights from 3,480 to 3,631 mm.

The STX Quadtrac is the machine of the big farms of Canada, Australia, Kazakhstan and eastern Germany; in 2007 the Steiger 335 to 535 range followed and in 2011 the Steiger 350 to 600 in the same logic.

On used tractors, operating hours, engine and powershift, articulation joint and steering cylinders, on Quadtracs the rubber belts, rollers and drive wheels (the most expensive item), on wheeled models axles and tyres, hydraulics and electronics count; parts run through CNH and Cummins.

Sources: SpecCodex register, model data: Case IH STX-Baureihe, Case IH (CNH, Hersteller, Werk Fargo)

Technical data

Engine

Fueldieselcorrect
Power275 hp (202.3 kW)correct
Rated speed2,000 rpmcorrect
Torque1,293 Nmcorrect
Cylinders6correct
Displacement8,268 cm³correct
Bore114 mmcorrect
Stroke135 mmcorrect
Compression ratio17.1correct
Coolingwater-cooledcorrect

Dimensions and weights

Length7,010 mmcorrect
Width3,048 mmcorrect
Height3,480 mmcorrect
Wheelbase3,531 mmcorrect
Unladen weight14,422 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox17 V/2 Rcorrect
Forward gears17correct
Reverse gears2correct
Front tyres20.8 R 42 AScorrect
Rear tyres20.8 R 42 AScorrect
Top speed30 km/hcorrect

Working data

Fuel tank capacity757 lcorrect

Origin and approval

Constructionarticulated framecorrect

Other data

Linkage categoryCat Icorrect

Where this model stands

Power-to-weight ratio: 14 kW/t (202 kW / 14.4 t)

Power class: Heavy (> 180 hp)

Stronger than 96% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case IH STX 275 have?

The Case IH STX 275 delivers 275 hp.

How much does the Case IH STX 275 weigh?

The unladen weight is 14,422 kg.

What engine does the Case IH STX 275 have?

6 cylinders, 8,268 cm³ displacement, Diesel.

How fast does the Case IH STX 275 go?

Top speed is 30 km/h.

What are the dimensions of the Case IH STX 275?

7,010 mm × 3,048 mm × 3,480 mm.

When was the Case IH STX 275 built?

Production years: 2000–2005.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 27 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare