Case IH SR130 – specifications
Series: Case IH Skid Steer Loader
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Case IH Skid Steer Loader – the SR and SV compact loaders from SR130 to SV340: radial and vertical lift, 34.2 to 62.6 kW, unladen weights of 2.3 to 4.14 tonnes
Case IH is the agricultural-equipment arm of the CNH group; in the SpecCodex register these compact loaders appear under the Case IH brand name, though technically the range comes from the Case Construction line-up. The type codes follow Case's usual logic: SR denotes radial-lift skid steers (Skid Steer Radial), SV the vertical-lift version (Skid Steer Vertical), and the following number roughly indicates the power class. This page brings together nine types from SR130 to SV340.
Read on 3 more paragraphs
The register lists here 9 versions with outputs from 34.2 to 62.6 kW, displacements from 2,215.5 to 3,392.1 cm³ and unladen weights from 2,300 to 4,136 kg; the engines on record are FPT units of the F5 range alongside four-cylinders of the ISM N844 family.
Compact loaders of this class are all-purpose machines for yard work, landscaping and smaller earthworks; the quick-attach plate takes buckets, forks, sweepers and mills. Radial-lift models lift in a flatter arc and suit work at ground level, vertical-lift models lift closer to vertical and reach greater dump heights when tipping over a wall.
On a used purchase, the condition of the lift-arm bushings, the tightness of the hydraulic cylinders and hoses, drive chains or wheel hubs depending on the version, the cab latch and restraint systems, and engine and radiator condition all count; parts run through the CNH dealer network of Case IH and Case Construction.
Sources: SpecCodex register, model data: Case IH Skid Steer Loader, Case IH (CNH, Hersteller)
Technical data
Engine
| Engine model | ISM N844L-Fcorrect |
|---|---|
| Power | 49.5 hp (34.2 kW)correct |
| Displacement | 2,215.5 cm³correct |
Dimensions and weights
| Unladen weight | 2,300 kgcorrect |
|---|
Where this model stands
Power-to-weight ratio: 14.9 kW/t (34 kW / 2.3 t)
Stronger than 18% of the skid steer loaders in the register — out of 293 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Case IH SR130 have?
The Case IH SR130 delivers 49.5 hp.
How much does the Case IH SR130 weigh?
The unladen weight is 2,300 kg.
What engine does the Case IH SR130 have?
2,216 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Skid-steer loader in 3D section
Turn the model, look inside and click an assembly — each one is explained.
