Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case IH › Quantum 75C

Case IH Quantum 75C

Series: Quantum C

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Quantum 75C, Case IH offers a model from the Quantum C series. The engine delivers 78 hp (57 kW), has 4 cylinders, with a displacement of 3,200 cm³. Rated speed is 2,300 rpm. The machine is 3,637 mm long and 2,335 mm high. The unladen weight is 3,070 kg. The wheelbase measures 2,098 mm. Lifting capacity is 2,900 kg. The engine is water-cooled. Tyres: front 6.50-16 / 300/70 R20, rear 13.6 R28. The fuel is diesel. Rated output across the Case IH range ranges from 31.4 to 500 hp; the Quantum 75C sits at the bottom of that range with 78 hp. Its immediate neighbours are the Farmall 75C below it with 77.1 hp and the 845 XL (A) above it with 80 hp. Rated output across the Case IH range ranges from 36 to 500 hp; here the Quantum 75C sits at the bottom of that range with 78 hp. 1222 Case IH models across 76 series are on record.

Case IH Quantum 75C: narrow special-purpose tractor for specialty crops with a 3,200cc four-cylinder diesel, 57 kW (78 hp) and a 2,900 kg hydraulic lift capacity

Case IH sells a range of narrow special-purpose tractors under the Quantum name for specialty crops; within it, the letter C marks the compact version built for tree nurseries and similar row crops with limited row spacing.

Read on 3 more paragraphs

The Quantum 75C carries a water-cooled four-cylinder diesel engine of 3,200 cm³, producing 57 kW (78 hp) at 2,300 rpm. At 2,335 mm high and 3,637 mm long on a 2,098 mm wheelbase, the machine stays narrow enough for tight rows; hydraulic lift capacity stands at 2,900 kg, unladen weight at 3,070 kg.

A narrow special-purpose tractor in this power class is built for working between tight rows of trees or bushes, where width and manoeuvrability matter more than raw pulling power; the comparatively high lift capacity allows implements for maintenance and harvest work in such crops to be carried, despite the machine's restricted overall width and low ground-to-canopy clearance.

When buying a Quantum 75C used, paint damage and dents on the narrow bodywork count, often caused by branch contact when working between rows, along with the condition of the hydraulic lift pump. Also worth checking are the clutch, the seals of the four-cylinder engine, and corrosion on the mudguards and chassis parts, which are exposed to this cramped working environment more than on standard-width tractors.

Sources: SpecCodex-Register: Kennwerte des Modells Case IH Quantum 75C, Case IH (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power78 hp (57 kW)correct
Rated speed2,300 rpmcorrect
Cylinders4correct
Displacement3,200 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,637 mmcorrect
Height2,335 mmcorrect
Wheelbase2,098 mmcorrect
Unladen weight3,070 kgcorrect

Drivetrain and chassis

Front tyres6.50-16 / 300/70 R20correct
Rear tyres13.6 R28correct

Working data

Lifting capacity2,900 kgcorrect

Where this model stands

Power-to-weight ratio: 18.6 kW/t (57 kW / 3.1 t)

Power class: Universal (40–100 hp)

Stronger than 54% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case IH Quantum 75C have?

The Case IH Quantum 75C delivers 78 hp.

How much does the Case IH Quantum 75C weigh?

The unladen weight is 3,070 kg.

What engine does the Case IH Quantum 75C have?

4 cylinders, 3,200 cm³ displacement, Diesel.

How much does the rear linkage of the Case IH Quantum 75C lift?

The rear linkage lifts 2,900 kg.

What are the dimensions of the Case IH Quantum 75C?

3,637 mm × 2,335 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare