Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case IH › JX › JX 95

Case IH JX 95

Series: JX

Source: mascus.com.tw

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The JX 95 is a tractor from the JX series made by Case IH. It belongs to the compact tractor class of the series and is equipped with a 4‑cylinder engine with a displacement of 3,908 cc. The rated speed is 2,500 rpm, maximum torque is 297 Nm and power is 96 hp (70.6 kW). The machine measures 3,798 mm in length, 2,055 mm in width and 2,685 mm in height. Gearbox options are 12 F/12 R and 20 F/12 R, the fuel tank holds 90 L and it falls into the lift‑category Cat I/II. Pump speed is 540/540E rpm.

With 70.6 kW the JX 95 ranks 2 of 14 models in the series, directly above the JX 90 (A) at 65.5 kW and just below the JX 1100 U at 73.5 kW. The series power range spans from 40.5 kW to 73.5 kW. A power of 70.6 kW enables pulling medium‑size implements, while the 297 Nm torque provides sufficient draw force for field work. The 90 L tank allows long operating periods without frequent refuelling, and the compact length of 3,798 mm aids maneuverability in tight spaces.

The JX 95 sits near the top of the JX lineup, only surpassed by the JX 1100 U. It is positioned between the smaller JX 90 and the slightly larger JX 1100 U, making it one of the higher‑powered models within the 40.5‑to‑73.5 kW span.

Case IH JX – Compact Entry Class, 2002 to 2013, with Three- and Four-Cylinder Engines, 40.5 to 73.5 kW and Operating Weight from 2,590 to 3,700 kg

The JX series was Case IH's compact, simply equipped tractor class, with recorded models from 2002 to 2013. Engine output ranges from 40.5 to 73.5 kW, with models rated in horsepower spanning 69 to 100 hp, using three- and four-cylinder engines with displacement from 2,710 to 4,485 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 2,590 to 3,700 kg, wheelbase from 2,175 to 2,385 mm, and top speed of the listed models is 30 km/h. Many models carry the A suffix, which at Case IH denotes a specific JX equipment variant.

The JX series targeted smaller farms, grassland operations and municipal use requiring a simple, rugged tractor without elaborate electronics. For a used model, check the gearbox version and cab variant, as both cabbed and open-platform versions were offered.

With rated outputs from 40.5 to 73.5 kW, the JX series falls within ISO 730 Category I to II for the rear three-point hitch, with a power take-off that in this power class usually runs at 540 revolutions per minute. Case IH remains part of the CNH Industrial group today, so spare parts for the engine, gearbox and hydraulics of this series run through the existing Case IH parts network, including for the simpler open-platform versions without a cab, which remain especially common on municipal maintenance machines today.

Sources: SpecCodex register, model data: Case IH JX, Case IH

Technical data

Engine

Power96 hp (70.6 kW)correct
Rated speed2,500 rpmcorrect
Torque297 Nmcorrect
Cylinders4correct
Displacement3,908 cm³correct

Dimensions and weights

Length3,798 mmcorrect
Width2,055 mmcorrect
Height2,685 mmcorrect

Drivetrain and chassis

Gearbox12 V/12 R and 20 V/12 Rcorrect

Working data

Fuel tank capacity90 lcorrect

Other data

Linkage categoryCat I/IIcorrect
PTO speed540/540E rpmcorrect

Frequently asked questions

How much power does the Case IH JX 95 have?

The Case IH JX 95 delivers 96 hp.

What engine does the Case IH JX 95 have?

4 cylinders, 3,908 cm³ displacement.

What are the dimensions of the Case IH JX 95?

3,798 mm × 2,055 mm × 2,685 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Latvian open data portal (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare