Case IH JX1095N
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Case IH (cnh) JX1095N is a tractor made by Case IH (cnh). It is powered by a four-cylinder engine producing 69 kW.
Power is transmitted through a synchro gearbox, drive type: MFWD.
It runs on diesel; the engine is water-cooled. It was replaced by the Case IH Farmall 95N. Within the range, rated power spans from 17 to 400 kW; with 69 kW, the JX1095N sits in the lower third. Directly alongside are the Farmall 95 with 67 kW below and the 4240 with 70 kW above.
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 92 hp (69 kW)correct |
| Cylinders | 4correct |
| Turbocharger | turbochargedcorrect |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|---|
| Gearbox | synchrocorrect |
| Forward gears | 16correct |
| Reverse gears | 16correct |
Working data
| Lifting capacity | 3,962 lbs (1797,1 kg)correct |
|---|---|
| PTO speed | 540/1000correct |
Origin and approval
| Plant | Italycorrect |
|---|---|
| Cab | Italy (Carraro)correct |
| Successor | Case IH Farmall 95Ncorrect |
Frequently asked questions
How much power does the Case IH JX1095N have?
The Case IH JX1095N delivers 92 hp.
What engine does the Case IH JX1095N have?
4 cylinders, diesel.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.