Case IH DX26 Farmall
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Case IH – other models: the collective page of tractors outside the named ranges, from the 94 series (1494, 1694, 3594) through the 585 and 885 to the Farmall D35, DX26 and the JX range, 19 to 136 kW
This page gathers the Case IH tractors the register could not assign to a named range – from the 94 series (1494, 1694, 3594) of the International Harvester era through the 585 and 885 utility tractors in four-wheel-drive, orchard and row-crop versions to the compact Farmall D35 and DX26 and the JX models built in India. Case IH was formed in 1985 from the merger of International Harvester's agricultural division with Case and has belonged to CNH Industrial, headquartered in Racine, Wisconsin, since 1999; the 94 series was still built to International Harvester engineering in Neuss and Doncaster, while the compact Farmall and JX models come from the group's Indian manufacturing.
Read on 3 more paragraphs
The register lists here 14 versions with 19 to 136 kW (26 to 182 hp) from three- to six-cylinders of 2,930 to 5,883 cm³, torque from 295 to 427 Nm at 2,100 to 2,850 rpm, with engines from Case IH, Case, Shibaura, Iveco, Valmet and MWM.
Case IH ranks alongside John Deere, New Holland and Fendt among the leading full-line makers of western farm equipment; the compact Farmall and JX models target small and part-time farms and municipal users, while the 585 and 885 served as utility tractors for medium-sized operations.
On used examples of the 94 series and the 585/885, the condition of hydraulics, clutch and gearbox and rust on bodywork and cab count, on the Farmall and JX compacts operating hours and the condition of the loader mount and electronics; parts run through the CNH network, on older models partly only through independent suppliers.
Sources: SpecCodex register, model data: Case IH (weitere Modelle), Case IH (CNH Industrial, Hersteller)
Technical data
Engine
| Engine make | Shibauracorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 26 hp (19 kW)correct |
| Rated speed | 2,850 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 69 cu incorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Wheelbase | 57.5correct |
|---|---|
| Unladen weight | 1,600correct |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|---|
| Gearbox | hydrostatic transmissioncorrect |
Working data
| Lifting capacity | 1,265correct |
|---|---|
| Fuel tank capacity | 5.3correct |
Frequently asked questions
How much power does the Case IH DX26 Farmall have?
The Case IH DX26 Farmall delivers 26 hp.
What engine does the Case IH DX26 Farmall have?
3 cylinders, Diesel.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
