StartTractorsCase IH › Maxxum 130 Pro

Case IH Maxxum 130 Pro MFWD

Series: Maxxum

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the Case IH Maxxum 130 Pro belongs to the Case IH MFWD Tractor series. 132 hp (96.9 kW) is what the four-cylinder engine gets out of 4.5 litres. Rated power is reached at 2,200 rpm.

Unladen, it tips the scales at 4,820 kg. Wheelbase is 2.41 m.

Within the range, rated power spans from 60.8 to 141 hp; with 132 hp, the Maxxum 130 Pro sits at the top. Directly alongside are the Maxxum 125 Pro with 127 hp below and the Maxxum 140 Pro with 141 hp above.

Technical data

Engine

Power131.8 hp (96.9 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement4,501.5 cm³correct
AspirationTurbocharged, aftercooledcorrect

Dimensions and weights

Wheelbase2,414correct
Unladen weight4,819.9 kgcorrect

Drivetrain and chassis

Gearbox typeSemi powershift transmissioncorrect
Forward gears16correct
Reverse gears16correct

Working data

Lifting capacity4,364 kgcorrect
Pump flow140.1 l/mincorrect
Fuel tank capacity176 lcorrect
PTO output110 hpcorrect

Where this model stands

Power-to-weight ratio: 20.1 kW/t (97 kW / 4.8 t)

Power class: Large (100–180 hp)

Stronger than 79% of the tractors in the register — out of 15,105 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case IH Maxxum 130 Pro have?

The Case IH Maxxum 130 Pro delivers 132 hp.

How much does the Case IH Maxxum 130 Pro weigh?

The unladen weight is 4,820 kg.

What engine does the Case IH Maxxum 130 Pro have?

4 cylinders, 4,502 cm³ displacement.

What is the PTO output of the Case IH Maxxum 130 Pro?

PTO output is 110 hp.

How much does the rear linkage of the Case IH Maxxum 130 Pro lift?

The rear linkage lifts 4,364 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare