StartTractorsCase IH › Maxxum 115

Case IH Maxxum 115 (4859.8 kg) MFWD

Series: Maxxum

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case IH Maxxum 115 is a tractor from the Case IH MFWD Tractor series. The six-cylinder engine, displacing 6.8 litres, produces 117 hp (85.8 kW). Rated power arrives at 2,200 rpm — the engine pulls from low down rather than needing to be revved.

Unladen, it tips the scales at 4,860 kg. Wheelbase is 2.66 m.

Within the range, rated power spans from 60.8 to 141 hp; with 117 hp, the Maxxum 115 sits in the upper third. Directly alongside are the Maxxum 110 with 112 hp below and the Maxxum 125 with 127 hp above.

Technical data

Engine

Power116.6 hp (85.8 kW)correct
Rated speed2,200 rpmcorrect
Cylinders6correct
Displacement6,751.5 cm³correct
AspirationTurbocharged, aftercooledcorrect

Dimensions and weights

Wheelbase2,664correct
Unladen weight4,859.8 kgcorrect

Drivetrain and chassis

Gearbox typeSynchrocorrect
Forward gears12correct
Reverse gears12correct

Working data

Lifting capacity3,406 kgcorrect
Pump flow102.6 l/mincorrect
Fuel tank capacity250.2 lcorrect
PTO output95 hpcorrect

Where this model stands

Power-to-weight ratio: 17.7 kW/t (86 kW / 4.9 t)

Power class: Large (100–180 hp)

Stronger than 74% of the tractors in the register — out of 14,914 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case IH Maxxum 115 have?

The Case IH Maxxum 115 delivers 117 hp.

How much does the Case IH Maxxum 115 weigh?

The unladen weight is 4,860 kg.

What engine does the Case IH Maxxum 115 have?

6 cylinders, 6,752 cm³ displacement.

What is the PTO output of the Case IH Maxxum 115?

PTO output is 95 hp.

How much does the rear linkage of the Case IH Maxxum 115 lift?

The rear linkage lifts 3,406 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare