Technical register for agricultural, construction and commercial machinery · sourced data
Start › Excavators & compaction › Case › CX240 Long Reach

Case CX240 Long Reach

Series: Case Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CX240 Long Reach from Case is part of the Case Hydraulic Excavator series. The engine delivers 182.5 hp (129 kW), has 6 cylinders, with a displacement of 5,883 cm³. Torque is 625 Nm. Rated speed is 2,150 rpm. The unladen weight is 27,473.2 kg. Ground clearance is 460.2 mm. The tank holds 340.7 litres. Maximum torque is reached at 1,400 rpm. The pump delivers 212.4 l/min. The hydraulic tank holds 225.2 litres. Working pressure is 343 bar. The cooling system holds 27.3 litres. The oil fill is 24.2 litres. The electrical system runs on 24 V. The engine fitted is the 6TAA-5904. The Case Hydraulic Excavator series covers 56 models. Rated output within it ranges from 89.2 to 269.3 hp; the CX240 Long Reach sits in the middle of that range with 182.5 hp. Its immediate neighbours are the CX250C below it with 179.6 hp and the CX290 above it with 192.6 hp. 620 Case models across 22 series are on record. The model is listed under Excavators & compaction. 19 verified figures from 1 source are on file.

Case excavators: from the 9000 series to the CX line in one bucket

The "Case Hydraulic Excavator" bucket combines 56 crawler excavators from two technically separate generations: the older 9000 series (examples 9010B through 9060B) and the modern CX line (such as CX130, CX135). Case fielded the B-model 9000-series machines from the late 1990s onward, then progressively replaced them with the CX line, which brought reworked hydraulics and cleaner engines.

Read on 3 more paragraphs

The CX range has kept growing since: in 2017 Case introduced the CX750D, which it describes as the largest and most powerful machine in its excavator line. The smaller CX models in this bucket, such as the CX130 and CX135, sit in the mid-market segment, while the 9000-series predecessors are now purely used machines with no factory backing.

Technically the register spans a wide range: 65 to 396 kW of engine power, 12,272 to 81,000 kg operating weight, 4- to 6-cylinder engines, displacement from 2998 to 15,700 cm³, and torque from 349 to 2250 Nm — from a compact site excavator to a heavy mass-excavation machine.

Buying used, the condition of the track rollers and chains says a lot about how a machine was worked: rocky ground and trenching wear them down far faster than plain earthmoving. On the older 9000-series models, also check parts availability for the hydraulic pump and control valve block, since that line is no longer in production.

Sources: Kennwerte der Modelle Case Hydraulic Excavator, Case Construction Equipment (Wikipedia)

Technical data

Engine

Engine model6TAA-5904correct
Power182.5 hp (129 kW)correct
Rated speed2,150 rpmcorrect
Torque625correct
Speed at max. torque1,400 rpmcorrect
Cylinders6correct
Displacement5,883 cm³correct
Aspirationturbochargedcorrect
Coolant capacity27.3 lcorrect
Engine oil capacity24.2 lcorrect

Dimensions and weights

Ground clearance460.2correct
Unladen weight27,473.2 kgcorrect

Working data

Pump flow212.4 l/mincorrect
Hydraulic oil capacity225.2 lcorrect
Hydraulic pressure343 barcorrect
Fuel tank capacity340.7 lcorrect

Other data

Cab height3,020.6correct
System voltage24 Vcorrect

More machines with this engine (6TAA-5904, 5)

Where this model stands

Power-to-weight ratio: 4.7 kW/t (129 kW / 27.5 t)

Stronger than 63% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case CX240 Long Reach have?

The Case CX240 Long Reach delivers 182 hp.

How much does the Case CX240 Long Reach weigh?

The unladen weight is 27,473 kg.

What engine does the Case CX240 Long Reach have?

6 cylinders, 5,883 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare