StartExcavators & compactionCase › CX230

Case CX230

Series: Case Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case CX230 belongs to the Case Hydraulic Excavator series. The engine delivers 105.1 kW, has 6 cylinders, with a displacement of 6,494.2 cm³. Rated speed is 1,950 rpm. The unladen weight is 22,370 kg. Ground clearance is 481.6 mm. The tank holds 265.4 litres. The pump delivers 402 l/min. The hydraulic tank holds 206.3 litres. Working pressure is 343 bar. The oil fill is 24.2 litres. The electrical system runs on 24 V. The engine fitted is the BB-6BGIT. The Case Hydraulic Excavator series covers 56 models. Rated output within it ranges from 65.6 to 396.7 kW; the CX230 sits at the bottom of that range with 105.1 kW. Its immediate neighbours are the 9030B Narrow below it with 97.7 kW and the CX210 above it with 109.6 kW. 620 Case models across 22 series are on record. The model is listed under Excavators & compaction. 15 verified figures from 1 source are on file.

Technical data

Engine

Engine modelBB-6BGITcorrect
Power105.1 kWcorrect
Rated speed1,950 rpmcorrect
Cylinders6correct
Displacement6,494.2 cm³correct
Aspirationturbochargedcorrect
Engine oil capacity24.2 lcorrect

Dimensions and weights

Ground clearance481.6correct
Unladen weight22,370 kgcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Working data

Pump flow402 l/mincorrect
Hydraulic oil capacity206.3 lcorrect
Hydraulic pressure343 barcorrect
Fuel tank capacity265.4 lcorrect

Other data

Height2,950.5correct

Where this model stands

Power-to-weight ratio: 4.7 kW/t (105 kW / 22.4 t)

Stronger than 44% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case CX230 have?

The Case CX230 delivers 105 kW.

How much does the Case CX230 weigh?

The unladen weight is 22,370 kg.

What engine does the Case CX230 have?

6 cylinders, 6,494 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare