StartWheel loadersCase › 721EXT

Case 721EXT

Series: Case Wheel Loader

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 721EXT from Case is part of the Case Wheel Loader series. The engine delivers 184.5 hp (128.3 kW), has 6 cylinders, with a displacement of 6,735.1 cm³. Torque is 808.1 Nm. Rated speed is 1,800 rpm. The unladen weight is 14,436.5 kg. The wheelbase measures 3,252.2 mm. Ground clearance is 365.8 mm. The tank holds 246.1 litres. The gearbox has 4 forward gears. There are also 3 reverse gears. Maximum torque is reached at 1,300 rpm. The pump delivers 119.6 l/min. The hydraulic tank holds 193.1 litres. The cooling system holds 37.1 litres. The electrical system runs on 24 V. The engine fitted is the Family IV 667TA/EED. Tier III Certified. Tyre size: 20,5 R25. The Case Wheel Loader series covers 71 models. Rated output within it ranges from 55 to 359.9 hp; the 721EXT sits in the middle of that range with 184.5 hp. Its immediate neighbours are the 721DXT below it with 183.5 hp and the 721F above it with 197.2 hp. 620 Case models across 22 series are on record. The model is listed under Wheel loaders. 22 verified figures from 1 source are on file.

Technical data

Engine

Engine modelFamily IV 667TA/EED, Tier III Certifiedcorrect
Power184.5 hp (128.3 kW)correct
Rated speed1,800 rpmcorrect
Torque808.1correct
Speed at max. torque1,300 rpmcorrect
Cylinders6correct
Displacement6,735.1 cm³correct
AspirationTurbocharged with Aftercoolercorrect
Coolant capacity37.1 lcorrect

Dimensions and weights

Wheelbase3,252.2correct
Ground clearance365.8correct
Unladen weight14,436.5 kgcorrect

Drivetrain and chassis

Gearbox type4F/3R Proportional w/Electronic Control Module torque sensing autoshift/manual gearbox scorrect
Forward gears4correct
Reverse gears3correct
Tyre size20.5 R25correct
System voltage24 Vcorrect

Working data

Pump flow119.6 l/mincorrect
Hydraulic oil capacity193.1 lcorrect
Fuel tank capacity246.1 lcorrect

Other data

Height3,404.6correct

Where this model stands

Power-to-weight ratio: 8.9 kW/t (128 kW / 14.4 t)

Stronger than 66% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case 721EXT have?

The Case 721EXT delivers 184 hp.

How much does the Case 721EXT weigh?

The unladen weight is 14,436 kg.

What engine does the Case 721EXT have?

6 cylinders, 6,735 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare