Start › Wheel loaders › Case › 1021G

Case 1021G

Series: Case Wheel Loader

Wikimedia Commons · CC BY-SA 4.0 · Srđan Popović · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case 1021G is a model in the Case Wheel Loader series. The engine delivers 324.4 hp (195.4 kW), has 6 cylinders, with a displacement of 8,701.5 cm³. Torque is 1,479.1 Nm. The unladen weight is 25,567 kg. The wheelbase measures 3,550.9 mm. Ground clearance is 438.9 mm. The tank holds 473.2 litres. The gearbox has 4 forward gears. There are also 3 reverse gears. The pump delivers 190 l/min. The cooling system holds 57.2 litres. The electrical system runs on 24 V. The engine fitted is the FPT F2CFE614H. The Case Wheel Loader series covers 71 models. Rated output within it ranges from 55 to 359.9 hp; the 1021G sits at the top of that range with 324.4 hp. Its immediate neighbours are the 921CXR below it with 294 hp and the 1221E above it with 339.6 hp. 620 Case models across 22 series are on record. The model is listed under Wheel loaders. 17 verified figures from 1 source are on file.

Technical data

Engine

Engine modelFPT F2CFE614Hcorrect
Power324.4 hp (195.4 kW)correct
Torque1,479.1correct
Cylinders6correct
Displacement8,701.5 cm³correct
Coolant capacity57.2 lcorrect

Dimensions and weights

Wheelbase3,550.9correct
Ground clearance438.9correct
Unladen weight25,567 kgcorrect

Drivetrain and chassis

Gearbox typepowershift transmissioncorrect
Forward gears4correct
Reverse gears3correct
System voltage24 Vcorrect

Working data

Pump flow190 l/mincorrect
Fuel tank capacity473.2 lcorrect

Other data

Height3,578.4correct

Where this model stands

Power-to-weight ratio: 7.6 kW/t (195 kW / 25.6 t)

Stronger than 84% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case 1021G have?

The Case 1021G delivers 324 hp.

How much does the Case 1021G weigh?

The unladen weight is 25,567 kg.

What engine does the Case 1021G have?

6 cylinders, 8,702 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

1021F

1021FXR

1121F

1121FXR

1121G

121E

121F

1221E

1221EXR

1221F

21D

21E

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare