StartWheel loadersCase › 621D

Case 621D

Series: Case Wheel Loader

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 621D from Case is part of the Case Wheel Loader series. The engine delivers 150.1 hp (101.4 kW), has 6 cylinders, with a displacement of 6,702.3 cm³. Torque is 671.1 Nm. Rated speed is 2,000 rpm. The unladen weight is 11,831 kg. The wheelbase measures 2,901.7 mm. Ground clearance is 475.5 mm. The tank holds 189.3 litres. The gearbox has 4 forward gears. There are also 3 reverse gears. Maximum torque is reached at 1,200 rpm. The pump delivers 171.1 l/min. The hydraulic tank holds 113.9 litres. The cooling system holds 24.2 litres. The electrical system runs on 24 V. The engine fitted is the Family III 668TA/M2. Tyre size: 20,5x25 L3. The Case Wheel Loader series covers 71 models. Rated output within it ranges from 55 to 359.9 hp; the 621D sits in the lower part of that range with 150.1 hp. Its immediate neighbours are the 621DXR below it with 148 hp and the 721B above it with 153.7 hp. 620 Case models across 22 series are on record. The model is listed under Wheel loaders. 22 verified figures from 1 source are on file.

Technical data

Engine

Engine modelFamily III 668TA/M2correct
Power150.1 hp (101.4 kW)correct
Rated speed2,000 rpmcorrect
Torque671.1correct
Speed at max. torque1,200 rpmcorrect
Cylinders6correct
Displacement6,702.3 cm³correct
Aspirationturbocharged and air to air cooledcorrect
Coolant capacity24.2 lcorrect

Dimensions and weights

Wheelbase2,901.7correct
Ground clearance475.5correct
Unladen weight11,831 kgcorrect

Drivetrain and chassis

Gearbox type4F/3R proportional w/ electronic control module torque sensing autoshift/manual gearboxcorrect
Forward gears4correct
Reverse gears3correct
Tyre size20.5x25 L3correct
System voltage24 Vcorrect

Working data

Pump flow171.1 l/mincorrect
Hydraulic oil capacity113.9 lcorrect
Fuel tank capacity189.3 lcorrect

Other data

Height3,307.1correct

Where this model stands

Power-to-weight ratio: 8.6 kW/t (101 kW / 11.8 t)

Stronger than 52% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case 621D have?

The Case 621D delivers 150 hp.

How much does the Case 621D weigh?

The unladen weight is 11,831 kg.

What engine does the Case 621D have?

6 cylinders, 6,702 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare