Bunnefeld BOOTSANH 3500
Built: 2014 · Series: Other models
More machines from model year 2014
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bunnefeld – other models: the collective page for boat trailers outside the named ranges, the Bootsanh 2700, 3000 and 3500 types plus a three-axle trailer, 480 to 1,140 kg unladen weight, up to 3,500 kg gross weight
This page gathers the Bunnefeld trailers the register could not assign to a named range. The designation Bootsanh denotes a boat trailer and appears here in versions graded by gross weight – 2700, 3000 and 3500; alongside them, the register lists a three-axle trailer (3-Achs-Anh).
Read on 4 more paragraphs
The register lists here 6 versions with unladen weights from 480 to 1,140 kg, gross weights from 2,700 to 3,500 kg, lengths from 8,600 to 8,950 mm and widths from 2,200 to 2,500 mm.
With gross weights up to 3,500 kg, all trailers listed here fall into EU trailer category O2, for which an overrun brake is required above 750 kg. On the three-axle trailer, an equalising suspension spreads the load more evenly across the three axles than is needed on the single-axle boat trailers, which instead rely on a simple leaf-spring or rubber-torsion axle.
Boat trailers of this size carry motorboats and sailing boats for private leisure use, while the three-axle trailer takes on heavier loads for commercial boat transport.
On a used purchase, corrosion on the frame and rollers from regular contact with water, the condition of the wheel bearings after launching, the cable winch and bow support, lighting with submersible connectors, and the coupling and brake system all matter. Spare parts run through the boat-trailer trade.
Sources: SpecCodex register, model data: Bunnefeld (weitere Modelle)
Technical data
Dimensions and weights
| Length | 8,600 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 6,570 mmcorrect |
| Unladen weight | 600 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Bunnefeld BOOTSANH 3500 weigh?
The unladen weight is 600 kg.
What is the gross vehicle weight of the Bunnefeld BOOTSANH 3500?
3,500 kg.
Up to what speed is the Bunnefeld BOOTSANH 3500 approved?
Approved up to 100 km/h.
What are the dimensions of the Bunnefeld BOOTSANH 3500?
8,600 mm × 2,500 mm.
When was the Bunnefeld BOOTSANH 3500 built?
Production years: 2014.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
