Bunge SATL302
Built: 1989 · Series: Other models
More machines from model year 1989
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bunge – other models: the collective page of semi-trailers of the SP range outside the named ranges, unladen weights from 2,900 to 33,900 kg, gross weights from 18,000 to 40,500 kg
This page gathers the Bunge semi-trailers the register could not assign to a named range. The models mostly carry the range name SP followed by a number, alongside the types AS 1802 and Satl302, with the same SP build size recorded in the register in different spellings, with and without a space. Such multiple entries often arise when models were added to the register from different sources or at different times.
Read on 3 more paragraphs
The register lists here 6 versions with unladen weights from 2,900 to 33,900 kg, gross weights from 18,000 to 40,500 kg, lengths from 7,370 to 13,800 mm and widths from 2,500 to 2,600 mm.
With gross weights up to 40.5 tonnes, the heaviest versions fall into vehicle class O4, while the lightest version, at just under 3 tonnes unladen and 18 tonnes gross, lies well below; the range thus spans from a medium-weight to a full-scale semi-trailer for general freight transport. Such variation in length, weight and type designation within one range is typical of model programmes grown over many years.
Buying used, the condition of the kingpin and landing legs, the brake system, axles and tyres, and the chassis and body for corrosion and distortion matter; given the wide span of unladen weights within the same range, a careful check of the type plate against the actual equipment is worthwhile. On the lighter versions, it is also worth checking whether parts were added later that changed the original unladen weight.
Sources: SpecCodex register, model data: Bunge (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,600 mmcorrect |
|---|---|
| Wheelbase | 995 mmcorrect |
| Unladen weight | 33,900 kgcorrect |
| Gross vehicle weight | 35,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Bunge SATL302 weigh?
The unladen weight is 33,900 kg.
What is the gross vehicle weight of the Bunge SATL302?
35,000 kg.
Up to what speed is the Bunge SATL302 approved?
Approved up to 100 km/h.
When was the Bunge SATL302 built?
Production years: 1989.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.