Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Bucher › Other models › CityCat VR50

Bucher CityCat VR50

Built: 2025-2026 · Series: Other models

More machines from model year 2025

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Bucher CityCat VR50 is a vehicle built by Bucher. Production: 2025-2026. The engine delivers 118 kW, has 4 cylinders, with a displacement of 4,485 cm³. The vehicle is 6,270 mm long and 2,040 mm wide. The unladen weight is 6,680 kg. The wheelbase measures 2,450 mm. Top speed is 80 km/h. The gross vehicle weight is 10,500 kg. The vehicle runs on 4 wheels. The gearbox offers 6 gears. Rated output across the Bucher range ranges from 62 to 118 kW; the CityCat VR50 sits at the top of that range with 118 kW. Its immediate neighbours are the CiityCat V20 below it with 62 kW. Unladen weight across the Bucher range ranges from 2,700 to 7,805 kg; here the CityCat VR50 sits in the upper part of that range with 6,680 kg. 28 Bucher models across 4 series are on record.

Bucher – other models: the collective page of the CityCat sweepers and the C401 outside the named ranges, 118 kW, four cylinders of 4,485 cm³ and a gross weight of 10,400 to 10,500 kg

This page gathers the Bucher vehicles the register could not assign to a named range: the C401 and the CityCat range (CityCat 5006, CityCat VR50). Bucher Municipal of Switzerland builds street sweepers for municipal use; CityCat is the family of self-propelled suction sweepers, and the number after the name usually gives the hopper capacity in litres.

Read on 3 more paragraphs

The register lists here 4 versions with 118 kW from four cylinders and 4,485 cm³ displacement. Unladen weights range from 6,020 to 7,805 kg, gross weights from 10,400 to 10,500 kg, lengths from 5,040 to 6,460 mm and widths from 1,817 to 2,350 mm.

Sweepers of this size class are the standard equipment of city cleaning departments and municipal operators for cleaning streets, cycle paths and squares; Bucher Municipal ranks among the established suppliers of this class in Europe.Bucher Municipal ranks alongside makers such as Ravo, Schmidt and Hako among the established suppliers of this class in Europe.

On sweepers of this type, wear on the sweeping brushes and suction hose, the condition of the fan and hopper, the tightness of the water tanks for dust suppression and the operating hours of the auxiliary engine driving the sweeping unit count; parts run through the Bucher service network. The condition of the side-brush arms and the calibration of the hopper scale, where fitted, also belong in a pre-purchase check.

Sources: SpecCodex register, model data: Bucher (weitere Modelle), Bucher Municipal (manufacturer)

Technical data

Engine

Power118 kWcorrect
Cylinders4correct
Displacement4,485 cm³correct

Dimensions and weights

Length6,270 mmcorrect
Width2,040 mmcorrect
Wheelbase2,450 mmcorrect
Unladen weight6,680 kgcorrect
Gross vehicle weight10,500 kgcorrect

Drivetrain and chassis

Gears6correct
Wheels4correct
Top speed80 km/hcorrect

Where this model stands

Power-to-weight ratio: 17.7 kW/t (118 kW / 6.7 t)

Stronger than 11% of the trucks in the register — out of 25,241 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Bucher CityCat VR50 have?

The Bucher CityCat VR50 delivers 118 kW.

How much does the Bucher CityCat VR50 weigh?

The unladen weight is 6,680 kg.

What is the gross vehicle weight of the Bucher CityCat VR50?

10,500 kg.

What engine does the Bucher CityCat VR50 have?

4 cylinders, 4,485 cm³ displacement.

How fast does the Bucher CityCat VR50 go?

Top speed is 80 km/h.

What are the dimensions of the Bucher CityCat VR50?

6,270 mm × 2,040 mm.

When was the Bucher CityCat VR50 built?

Production years: 2025-2026.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare