Bt C4D150D
Series: BT Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | 1 DZ-IIcorrect |
|---|---|
| Fuel | dieselcorrect |
| Rated speed | 2,400 rpmcorrect |
| Displacement | 2,487.6 cm³correct |
Dimensions and weights
| Width | 1,100.3correct |
|---|---|
| Wheelbase | 1,490.5correct |
| Ground clearance | 89.2correct |
| Unladen weight | 3,100 kgcorrect |
Drivetrain and chassis
| Tyre type | front 23x9-10 rear 18x7-8correct |
|---|---|
| Top speed | 18 km/hcorrect |
Frequently asked questions
How much does the Bt C4D150D weigh?
The unladen weight is 3,100 kg.
What engine does the Bt C4D150D have?
2,488 cm³ displacement, diesel.
How fast does the Bt C4D150D go?
Top speed is 18 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.