Bt C3E130R
Series: Pozostałe modele
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Bt C3E130R is a forklift truck made by Bt. Engine output is 5.1 kW.
It will not go faster than 13 km/h — a working pace, not a travelling one. Operating weight comes to 2,820 kg. It carries 1,250 kg.
Within the range, rated power spans from 5.1 to 17 kW; with 5.1 kW, the C3E130R sits at the bottom end. The next one up is the C4E160NL with 9 kW.
Technical data
Engine
| Power | 5.1 kWcorrect |
|---|
Dimensions and weights
| Ground clearance | 90.2 mmcorrect |
|---|---|
| Unladen weight | 2,820 kgcorrect |
Drivetrain and chassis
| Tyre type | 18x7-8correct |
|---|---|
| Top speed | 12.6 km/hcorrect |
Working data
| Lifting capacity | 1,250 kgcorrect |
|---|
Other data
| Front wheels | 2correct |
|---|---|
| Kraftstoffart | electriccorrect |
| Lift speed | 31.2 m/mincorrect |
| Load centre | 500.1 mmcorrect |
| Mast tilt back | 6 Gradcorrect |
| Mast tilt forward | 3 Gradcorrect |
| Rear wheels | 1correct |
| Senkgeschwindigkeit mmin | 31.2 m/mincorrect |
Where this model stands
Power-to-weight ratio: 1.8 kW/t (5 kW / 2.8 t)
Stronger than 12% of the forklift trucks in the register — out of 323 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Bt C3E130R have?
The Bt C3E130R delivers 5.1 kW.
How much does the Bt C3E130R weigh?
The unladen weight is 2,820 kg.
How fast does the Bt C3E130R go?
Top speed is 12.6 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.