Broos VS1335 – specifications
Built: 1992 · Series: Other models
Data for the version built 1992 · Data origin: Official register · sources
More machines from model year 1992
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Broos – other models: EU class O2 trailers with a gross weight of 1,300 to 3,500 kg, unladen weights of 520 to 2,140 kg, widths of 2.15 to 2.46 m
This page gathers the Broos trailers the register could not assign to a named range. The models fall into EU vehicle class O2 for trailers with a gross weight of 750 kg to 3.5 t; the designations range from simple number codes to named versions such as VS1335. For a buyer, what matters on this collective page above all is that the spans given reflect the values actually captured in the register.
Read on 4 more paragraphs
The register lists here 5 versions with unladen weights from 520 to 2,140 kg, gross weights from 1,300 to 3,500 kg and widths from 2,150 to 2,460 mm.
Above 750 kg, an overrun brake is required throughout for this class; below that threshold, a trailer could also be driven unbraked. Towing only needs licence category B as long as the combination's gross weight stays below 3,500 kg, otherwise category BE becomes necessary.
Trailers of this class are used as transport, tipping and special-body trailers; the comparatively high unladen weight of some models points to a reinforced frame or a permanently fitted body rather than a plain platform version. The versions listed on this page show the range in which the maker operates outside its named model ranges.
On used trailers, axle and brake condition, rust on the frame and load bed, the overrun brake device, lighting and the tightness of permanently fitted bodies count; parts for axles and couplings are, in this class, generally available across manufacturers.
Sources: SpecCodex register, model data: Broos (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,150 mmcorrect |
|---|---|
| Coupling-to-axle distance | 1,480 mmcorrect |
| Unladen weight | 1,470 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Broos VS1335 weigh?
The unladen weight is 1,470 kg.
What is the gross vehicle weight of the Broos VS1335?
3,500 kg.
Up to what speed is the Broos VS1335 approved?
Approved up to 100 km/h.
When was the Broos VS1335 built?
Production years: 1992.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
