StartTractorsBranson › 4720i

Branson 4720i 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the Branson 4720i belongs to the Branson 4WD Tractor series. 43 hp (31.3 kW) is what the four-cylinder engine gets out of 2.3 litres. Rated output is reached at 2,600 rpm, so it works in the lower rev range.

Within the range, rated power spans from 29.4 to 65.9 hp; with 42.6 hp, the 4720i sits in the mid-field. Directly alongside are the 3820i with 38.5 hp below and the 4720h with 47.7 hp above.

Technical data

Engine

Engine modelA2300N2correct
Power42.6 hp (31.3 kW)correct
Rated speed2,600 rpmcorrect
Cylinders4correct
Displacement2,287.6 cm³correct

Drivetrain and chassis

Gearbox typesynchromesh gearboxcorrect
Forward gears12correct
Reverse gears12correct
Tyre sizefront: 8-18, rear:12.4-28correct
System voltage12 Vcorrect

Working data

Pump flow31.8 l/mincorrect
Fuel tank capacity41.6 lcorrect

Other data

Height2,465.8correct

Frequently asked questions

How much power does the Branson 4720i have?

The Branson 4720i delivers 42.6 hp.

What engine does the Branson 4720i have?

4 cylinders, 2,288 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare