Technical register for agricultural, construction and commercial machinery · sourced data

Brandenburger Traktorenwerke KT 732

Series: KT - Prototyp

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The KT 732 from Brandenburger Traktorenwerke is part of the KT - Prototyp series. The engine delivers 63 hp (46.34 kW), has 4 cylinders, with a displacement of 8,590 cm³. Rated speed is 1,150 rpm. The machine is 3,985 mm long, 1,700 mm wide and 2,280 mm high. The unladen weight is 4,940 kg. The wheelbase measures 2,250 mm. Ground clearance is 280 mm. Top speed is 9.5 km/h. Transmission: 4V / 1R. Drive: Kette. The engine is Umlaufkühlung. Tyres: front Kette, 350 mm, rear Kette, 350 mm. The fuel is diesel. The bore measures 125 mm. The stroke is 175 mm. The compression ratio is 19:1. Construction: unit construction (no separate frame). The gearbox offers 4 forward gears. There are also 1 reverse gears. Injection pressure is 150 bar. Rated output across the Brandenburger Traktorenwerke range ranges from 30 to 63 hp; the KT 732 sits at the top of that range with 63 hp. Its immediate neighbours are the KS 07/60 ("Rübezahl") below it with 60 hp. Rated output across the Brandenburger Traktorenwerke range ranges from 22.06 to 46.34 kW; here the KT 732 sits at the top of that range with 46.34 kW. 8 Brandenburger Traktorenwerke models across 5 series are on record.

Brandenburger Traktorenwerke KT 732: prototype with an 8,590cc four-cylinder diesel, circulation cooling, 63 hp and a top speed of 9.5 km/h

The Brandenburger Traktorenwerke built a mid-power four-cylinder diesel tractor under the KT range; the KT 732 is recorded as the prototype of this design, that is, a test vehicle ahead of possible series production.

Read on 3 more paragraphs

The KT 732 carries a four-cylinder diesel engine with 8,590 cm³ of displacement, producing 63 hp, or 46.34 kW, at 1,150 rpm, and works with evaporative circulation cooling rather than a radiator with a water pump. At 4,940 kg, 3,985 mm long, with a 2,250 mm wheelbase and 1,700 mm width and 2,280 mm height, the machine reaches a top speed of 9.5 km/h. At 1,150 rpm the engine ran at a markedly lower speed than typical tractor diesels of later decades, favouring durability over specific output.

Evaporative circulation cooling without a radiator was a simple, low-maintenance solution for slow-running tractor engines, in which the cooling water stayed in circuit only through evaporation and refilling. The low top speed of 9.5 km/h points to a purely field-work machine, with no role in road transport.

With a test vehicle such as this prototype, the first question is whether it is genuinely the original vehicle or a later reconstruction, since prototypes in museums and collections have often been reworked more than once. Technically, the condition of the circulation cooling, the tightness of the fuel system and cracking of the engine block after decades of standing should be checked.

Sources: SpecCodex-Register: Kennwerte des Modells Brandenburger Traktorenwerke KT 732

Technical data

Engine

Fueldieselcorrect
Power63 hp (46.34 kW)correct
Rated speed1,150 rpmcorrect
Cylinders4correct
Displacement8,590 cm³correct
Bore125 mmcorrect
Stroke175 mmcorrect
Compression ratio19correct
Injection pressure150 barcorrect
Coolingcirculating coolingcorrect

Dimensions and weights

Length3,985 mmcorrect
Width1,700 mmcorrect
Height2,280 mmcorrect
Wheelbase2,250 mmcorrect
Ground clearance280 mmcorrect
Unladen weight4,940 kgcorrect

Drivetrain and chassis

DriveKettecorrect
Gearbox4V / 1Rcorrect
Forward gears4correct
Reverse gears1correct
Front tyresKette, 350 mmcorrect
Rear tyresKette, 350 mmcorrect
Top speed9.5 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Where this model stands

Power-to-weight ratio: 9.4 kW/t (46 kW / 4.9 t)

Power class: Universal (40–100 hp)

Stronger than 44% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Brandenburger Traktorenwerke KT 732 have?

The Brandenburger Traktorenwerke KT 732 delivers 63 hp.

How much does the Brandenburger Traktorenwerke KT 732 weigh?

The unladen weight is 4,940 kg.

What engine does the Brandenburger Traktorenwerke KT 732 have?

4 cylinders, 8,590 cm³ displacement, Diesel.

How fast does the Brandenburger Traktorenwerke KT 732 go?

Top speed is 9.5 km/h.

What are the dimensions of the Brandenburger Traktorenwerke KT 732?

3,985 mm × 1,700 mm × 2,280 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 26 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare