Bomag BW216D4
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Bomag BW216D4 is a Compaction equipment made by Bomag. Engine output is 114 kW.
Unladen weight is 17,950 kg.
Within the range, rated power spans from 56 to 147 kW; with 114 kW, the BW216D4 sits in the mid-field. Directly alongside are the BW212D3 with 90 kW below and the BW219DH4 with 147 kW above.
Technical data
Engine
| Engine make | 2,349correct |
|---|---|
| Engine model | BF 4 M 1013ECcorrect |
| Power | 114 kWcorrect |
Dimensions and weights
| Length | 6,130 mmcorrect |
|---|---|
| Width | 2,300 mmcorrect |
| Unladen weight | 17,950 kgcorrect |
Working data
| Fuel tank capacity | 340.3 lcorrect |
|---|
Where this model stands
Power-to-weight ratio: 6.4 kW/t (114 kW / 17.9 t)
Stronger than 51% of the compaction equipment in the register — out of 219 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Bomag BW216D4 have?
The Bomag BW216D4 delivers 114 kW.
How much does the Bomag BW216D4 weigh?
The unladen weight is 17,950 kg.
What are the dimensions of the Bomag BW216D4?
6,130 mm × 2,300 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Road roller in 3D section
Turn the model, look inside and click an assembly — each one is explained.