Start › Compaction equipment › Bomag › BW213PDH-3

Bomag BW213PDH-3

Series: Bomag Vibratory Compactor

Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The BW213PDH-3 from Bomag is part of the Bomag Vibratory Compactor series. The engine delivers 157.8 hp (116 kW). The unladen weight is 12,830 kg. Ground clearance is 490.2 mm. Top speed is 12.1 km/h. The tank holds 340.3 litres. The electrical system runs on 12 V. The engine fitted is the 6B5,9 QSB-155C. The Bomag Vibratory Compactor series covers 16 models. Rated output within it ranges from 44.6 to 172 hp; the BW213PDH-3 sits at the top of that range with 157.8 hp. Its immediate neighbours are the BW211PD-40 below it with 134.8 hp and the BW213PDH-4 above it with 162.2 hp. 291 Bomag models across 8 series are on record. The model is listed under Road construction. 9 verified figures from 1 source are on file.

Technical data

Engine

Engine model6B5.9 QSB-155Ccorrect
Power157.8 hp (116 kW)correct

Dimensions and weights

Ground clearance490.2correct
Unladen weight12,830 kgcorrect

Drivetrain and chassis

Top speed12.1 km/hcorrect
System voltage12 Vcorrect

Working data

Fuel tank capacity340.3 lcorrect

Other data

Height2,971.8correct

Where this model stands

Power-to-weight ratio: 9 kW/t (116 kW / 12.8 t)

Stronger than 55% of the compaction equipment in the register — out of 223 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Bomag BW213PDH-3 have?

The Bomag BW213PDH-3 delivers 158 hp.

How much does the Bomag BW213PDH-3 weigh?

The unladen weight is 12,830 kg.

How fast does the Bomag BW213PDH-3 go?

Top speed is 12.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

BW124 PDH-40

BW124DH-3

BW124PDH-3

BW124PDH-3 w/ blade

BW145PDH-3

BW172PD-2

BW172PDB-2

BW177PDH-3

BW177PDH-40

BW211PD-3

BW211PD-40

BW213PDH-2

Sources: [1]

Road roller in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare