Bomag BW177D4
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Bomag BW177D4 is a Compaction equipment made by Bomag. The engine produces 56 kW.
Empty, it weighs 8,870 kg.
Within the range, rated power spans from 56 to 147 kW; with 56 kW, the BW177D4 sits at the bottom end. The next one up is the BM213DH4BVC with 90 kW.
Technical data
Engine
| Engine make | 2,349correct |
|---|---|
| Engine model | BF 4 M 2011correct |
| Power | 56 kWcorrect |
Dimensions and weights
| Length | 4,910 mmcorrect |
|---|---|
| Width | 1,840 mmcorrect |
| Unladen weight | 8,870 kgcorrect |
Working data
| Fuel tank capacity | 150.3 lcorrect |
|---|
Where this model stands
Power-to-weight ratio: 6.3 kW/t (56 kW / 8.9 t)
Stronger than 16% of the compaction equipment in the register — out of 222 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Bomag BW177D4 have?
The Bomag BW177D4 delivers 56 kW.
How much does the Bomag BW177D4 weigh?
The unladen weight is 8,870 kg.
What are the dimensions of the Bomag BW177D4?
4,910 mm × 1,840 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Road roller in 3D section
Turn the model, look inside and click an assembly — each one is explained.