Bolens QT16
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Bolens QT16 is a tractor made by Bolens. It is powered by a two-cylinder engine producing 12 kW.
Gearbox: Hydrostatic.
It runs on petrol; the engine is air-cooled. As standard, it runs on 16x6.5-8 tyres at the front and 23x10.5-12 at the rear.
Technical data
Engine
| Engine make | Onancorrect |
|---|---|
| Fuel | petrolcorrect |
| Power | 16 hp (12 kW)correct |
| Cylinders | 2correct |
| Displacement | 40.28correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Width | 30.25correct |
|---|---|
| Height | 45correct |
| Wheelbase | 48.5correct |
| Unladen weight | 850correct |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|---|
| Gearbox | hydrostatic transmissioncorrect |
| Front tyres | 16x6.5-8correct |
| Rear tyres | 23x10.5-12correct |
Other data
| Ground clearance | 7.5correct |
|---|
Frequently asked questions
How much power does the Bolens QT16 have?
The Bolens QT16 delivers 16 hp.
What engine does the Bolens QT16 have?
2 cylinders, Benzin.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
