Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Bohlen & Paas › Other models › MW75

Bohlen & Paas MW75

Built: 1975 · Series: Other models

More machines from model year 1975

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The MW75 comes from Bohlen & Paas. Production: 1975. The vehicle is 7,850 mm long and 2,540 mm wide. The unladen weight is 3,080 kg. The wheelbase measures 4,080 mm. Top speed is 100 km/h. The gross vehicle weight is 4,800 kg. Unladen weight within this group ranges from 85 to 84,800 kg; the MW75 sits at the bottom of that range with 3,080 kg. Its immediate neighbours are the 1AFCST00 below it with 3,075 kg and the 2756A Autocycle above it with 3,084.4 kg. Gross vehicle weight within this group ranges from 470 to 722,500 kg; here the MW75 sits at the bottom of that range with 4,800 kg.

Bohlen & Paas – further models: the collective page for trailers outside the named series, MW75 and MW81, 2,220 to 3,080 kg unladen weight, 2,500 to 4,800 kg gross weight

This page collects the Bohlen & Paas trailers that the register does not assign to any named series. Two types are listed: MW75 and MW81. Both stand in the register as separate entries, and the designations themselves give no indication of a series logic.

Read on 4 more paragraphs

The register lists 2 versions here with unladen weights from 2,220 to 3,080 kg, gross weights from 2,500 to 4,800 kg, lengths from 6,200 to 7,850 mm and widths from 2,430 to 2,540 mm.

With gross weights of 2.5 to 4.8 tonnes, the span runs from EU trailer category O2 to category O3; the boundary sits at 3,500 kg, above which a plain overrun brake is no longer permitted without separate type approval.

With gross weights of 2.5 to 4.8 tonnes, the range spans trailers within category BE up to versions that already require a category C towing vehicle; lengths of up to almost 8 metres point to platform or tandem-axle trailers for equipment and goods transport.

When buying used, check the condition of the axles and wheel bearings, the operation of the braking system and brake linkage, rust on the chassis and drawbar, and the condition of lighting and the electrical connector as well as tyres and wheels. Spare parts for such small makes usually come through independent trailer workshops rather than a manufacturer network; on the heavier of the two versions it is also worth checking the suspension and brake cylinders.

Sources: SpecCodex register, model data: Bohlen & Paas (weitere Modelle)

Technical data

Dimensions and weights

Length7,850 mmcorrect
Width2,540 mmcorrect
Wheelbase4,080 mmcorrect
Unladen weight3,080 kgcorrect
Gross vehicle weight4,800 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Bohlen & Paas MW75 weigh?

The unladen weight is 3,080 kg.

What is the gross vehicle weight of the Bohlen & Paas MW75?

4,800 kg.

Up to what speed is the Bohlen & Paas MW75 approved?

Approved up to 100 km/h.

What are the dimensions of the Bohlen & Paas MW75?

7,850 mm × 2,540 mm.

When was the Bohlen & Paas MW75 built?

Production years: 1975.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare