Binderberger BRENNHOLZPROFI
Built: 2022 · Series: Other models
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Binderberger Brennholzprofi: the only trailer of this brand outside the named ranges, model year 2022, 3,500 kg gross weight, 3,430 kg unladen weight
Binderberger is an Austrian manufacturer of forestry equipment, including forwarder trailers, log splitters and loading cranes. This page carries the brand's only trailer model that the register did not assign to a named range: the Brennholzprofi from 2022.
Read on 3 more paragraphs
The Brennholzprofi has a gross weight of 3,500 kg against an unladen weight of 3,430 kg. At a length of 5,770 mm, an axle spacing of 4,000 mm and a width of 2,500 mm, it stands on two axles. The high unladen weight relative to the gross weight is, for forestry trailers of this kind, often due to a permanently fitted loading crane, which by itself takes up a large part of the permitted load.
With a gross weight of 3,500 kg, the Brennholzprofi falls into EU category O2, where the brakes are usually an overrun design. The range's name points to its purpose: forwarding and hauling firewood out of the forest, for which a loading crane allows stacking and loading the logs without extra equipment.
On a used forestry trailer with a crane, what counts is the condition of the hydraulic hoses and cylinders for leaks, wear on the crane bearing and grapple, the condition of the axles and overrun brake despite off-road use, rust on the frame and stakes, and the function of the lighting after work in the undergrowth. With such a small calculated load margin, it is also worth checking what additional weight the crane actually takes up in operation.
Sources: SpecCodex-Register: Kennwerte des Modells Brennholzprofi
Technical data
Dimensions and weights
| Length | 5,770 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 4,000 mmcorrect |
| Unladen weight | 3,430 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Binderberger BRENNHOLZPROFI weigh?
The unladen weight is 3,430 kg.
What is the gross vehicle weight of the Binderberger BRENNHOLZPROFI?
3,500 kg.
Up to what speed is the Binderberger BRENNHOLZPROFI approved?
Approved up to 100 km/h.
What are the dimensions of the Binderberger BRENNHOLZPROFI?
5,770 mm × 2,500 mm.
When was the Binderberger BRENNHOLZPROFI built?
Production years: 2022.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
