Biilmann AC 1635 – specifications
Built: 2008 · Series: Other models
Data for the version built 2008 · Data origin: Official register · sources
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Biilmann SD 1735: the only trailer of this brand outside the named ranges, model year 2012, 3,500 kg gross weight, 760 kg unladen weight
This page carries the only trailer model of Biilmann that the register did not assign to a named range: the SD 1735 from 2012. The narrow track and the load spread across three axles point to a boat trailer rather than a trailer with a closed box body.
Read on 3 more paragraphs
The SD 1735 has a gross weight of 3,500 kg against an unladen weight of 760 kg, giving a payload of 2,740 kg. At a width of only 2,160 mm and an axle spacing of 4,780 mm, it stands on three axles, an unusually fine load spread for a 3.5-tonne trailer, typical for carrying a long but light watercraft without local flexing.
With a gross weight of 3,500 kg, the SD 1735 falls into EU category O2, where the brakes are usually an overrun design. The narrow build under 2.2 m stays below many slipway width limits and eases manoeuvring on narrow access roads to the water.
On a used boat trailer, what counts especially is corrosion on frame and axles, which often stand in salt or fresh water, the condition of the rollers and skids of the cradle, the function of the overrun brake despite frequent contact with water, and the tightness of the wheel bearings, which fail more often on boat trailers than on road trailers. With three axles, it is also worth checking that all of them carry load evenly and that none of the tyres show uneven wear from an unbalanced load.
Sources: SpecCodex-Register: Kennwerte des Modells SD 1735
Technical data
Dimensions and weights
| Width | 2,150 mmcorrect |
|---|---|
| Coupling-to-axle distance | 850 mmcorrect |
| Unladen weight | 660 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Biilmann AC 1635 weigh?
The unladen weight is 660 kg.
What is the gross vehicle weight of the Biilmann AC 1635?
3,500 kg.
Up to what speed is the Biilmann AC 1635 approved?
Approved up to 100 km/h.
When was the Biilmann AC 1635 built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
