Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Bergmeister › Other models › 1064

Bergmeister 1064

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Bergmeister 1064 belongs to the Pozostałe modele series. The engine delivers 100 hp (74 kW), has 4 cylinders. The machine is 1,150 mm wide. Top speed is 40 km/h. Transmission: 12 V, 12 R. Tyres: front 240/70R16, rear 320/85R24. The fuel is diesel. Rated output within this group ranges from 2 to 760 hp; the 1064 sits at the bottom of that range with 100 hp. Its immediate neighbours are the Rex 105 F below it with 99.9 hp and the 6100D Cab above it with 100.3 hp. Rated output within this group ranges from 1.9 to 559 kW; here the 1064 sits at the bottom of that range with 74 kW.

Bergmeister – other models: the collective page of the Bavarian tractor brand outside the named ranges, with the 864 and 1064 types, four-cylinder diesel engines of 63 to 74 kW

This page gathers tractors of the Bavarian brand Bergmeister that the register could not assign to a named range, represented here by the 864 and 1064 types. The type designations order the models by power class, as was common for Bavarian and southern German tractor brands in the second half of the 20th century. Both versions carry four-cylinder diesel engines and, in width, fall within the usual range for universal farm tractors.

Read on 3 more paragraphs

The register lists here 2 versions with 63 to 74 kW from four-cylinder diesel engines, with widths from 1,150 to 1,180 mm.

Tractors in this power class between 63 and 74 kW covered the mid-to-upper segment of farms in Bavaria and southern Germany and were used both for arable work and, with front hydraulics and PTO, for grassland work and transport tasks. The Bergmeister brand competed in this segment with other southern German makers such as Fendt, Eicher and Deutz-Fahr, who had their core customers in the same market environment.

Buying a tractor of this power class and vintage used, the condition of the injection pump and clutch, rust on the mudguards and cab, and the tightness of the hydraulics matter most; the tyres should be checked for even wear and cracking in the rubber. Spare parts for the now fairly rare Bergmeister brand are mainly found through specialist farm-machinery dealers and collector fairs in Bavaria.

Sources: SpecCodex register, model data: Bergmeister (weitere Modelle)

Technical data

Engine

Fueldieselcorrect
Power100 hp (74 kW)correct
Cylinders4correct

Dimensions and weights

Width1,150 mmcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox12 V, 12 Rcorrect
Front tyres240/70R16correct
Rear tyres320/85R24correct
Top speed40 km/hcorrect

Frequently asked questions

How much power does the Bergmeister 1064 have?

The Bergmeister 1064 delivers 100 hp.

What engine does the Bergmeister 1064 have?

4 cylinders, Diesel.

How fast does the Bergmeister 1064 go?

Top speed is 40 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare